Question about Cars & Trucks

Open Question

How do I wire up a tow bar connector socket with regard to the rear parking sensors ?

I have the special socket with the reed switch but can't find info on how to connect the reed switch into the the vehicle system

Posted by on

  • 1 more comment 
  • Brad Brown Nov 21, 2014

    Hi Keith Gregory, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Make model and year

  • Keith Gregory
    Keith Gregory Nov 22, 2014

    Hi Brad, I did put the details on the original post but it has apparently got lost somewhere. The vehicle is a 2010 Hyundai Santa Fe R2.2 diesel auto. When the towbar was fitted the connector socket was the wrong one for reversing park sensors. I now have the correct one with reed switch but need to know how to connect the reed switch into the vehicle sensor circuit. Thanks, Keith

  • Brad Brown Nov 28, 2014

    https://www.hyundaitechinfo.com/ make a free account and look at the information for your vehicle. This is the same sight that mechanics use and it has all the info for all the systems on he vehicle. it is hard to navigate though.

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 188 Answers

SOURCE: tow bar wiring

Go to U-haul, and they have a kit to make it easy to fix your problem.

Posted on Jan 31, 2009

Ad
  • 3 Answers

SOURCE: Tow bar trailer socket wiring connection point to car wiring?

The connectors for towing wire harnesses on foresters are generally on the passenger side, below the rear taillight inside the cargo space. some require pulling up the foam block that is between the spare tire compartment and the taillight. Check where you replace the tailights from inside the car, if there isn't a matching connector hanging out there, check around the spare tire compartment, see if you can remove the carpeted foam block next to the compartment and find the plug under there.

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Y need book for fuse box


Fuses are listed here
* = maxi fuse
1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay
6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay
mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator
Interior fuse panel (mini fuses)
1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**
15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat,

i copied this off another post hope this helps

Oct 09, 2016 | 2003 Ford Explorer

1 Answer

Wiring diagram for a toe bar


that will take some major rewiring, no?

front toebar. wiring. to tower hitch.

first off we dont know what is towing car, nor its hitch wiring

but in most cases, you may need and adaptor, to convert simple

USA wiring to Euro type wiring.

there are 2 systems. that cant just be wired in willy nilly.

is this permanent? one tow , only

or for ever. we cant guess that.

if 1 tow ,why not use clamp on aux light bar and get it done

rent them at u-haul?

if perm, is need , get a pro shop to do this.

how to do this and not damage the cars , electronics that controls

lights can be very tricky.

the safest way is to have new connector installed to rear lights.

to the main harness, then you unplug the cars harness side

and then connect the tow bar new custom harness connector to the rear.

none of this is easy or simple.

tell more get more.

Sep 12, 2014 | Suzuki SX4 Cars & Trucks

1 Answer

Which color wire to use to wire tow bar plug on suzuki gv1600


If you mean to wire the trailer hitch plug, then you can buy a connector that plugs into rear wiring harness and has the wires with plug coming off it, this is the easiest wat to do it or you will need a testlight to test for power to park, signal ,brake lights.tell you what heres a wiring diagram to help you.b4a1b42.gif

Sep 10, 2010 | 2001 Suzuki Vitara

1 Answer

Abs fuse


Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump2.gif relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 29, 2009 | 2003 Ford Explorer

2 Answers

I need a fuse box diagram for a 2003 Ford Explorer Sport


I believe that this is what you are looking for.....
Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

attachment.php?attachmentid=29397&d=1133918512

Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 10, 2009 | 2003 Ford Explorer Sport

3 Answers

2004 jaguar x type saloon towbar fitment.


You will have to get a factory approved kit . Any modification to the lighting system will interfere with the Bulb faifure warning as the wattages and resistances will be altered outside the normal Jaguar settings. There is designated kits for these types of electrical systems from quality tow bar makers .......

Oct 07, 2009 | 2003 Jaguar X-Type

2 Answers

Need to wire tow bar into 1999 LT35


Hi ebrown80
You can splice into each wire in turn at the back of the lamps.No need to cut right through the origional loom completly. For a really good joint you should spot solder each connection and insulate all joints well. Tow bar sockets operate on a common earth, so no need to loop each one.
Check back of socket and you will find each pin has a number. 1---7
The wiring colours from the socket back to the loom are as follows
No 1 Pin--- Yellow Wire---Left Side Flasher
No 2 Pin--- Blue Wire------Fog Lamp.
No 3 Pin--- White Wire--- Earth. Must have good contact or nothing else will operate.
No 4 Pin----Green Wire--- Right Side Flasher.
No 5 Pin----Brown Wire---- Left Side Park Light
No 6 Pin----Red Wire-------Brake Lights
No 7 Pin----Black Wire----Right Side Park Light. Centre Pin.
I hope this helps you out
Best of Luck with it
John


Sep 13, 2009 | 2004 Volkswagen Eurovan

1 Answer

Diagram for 03 reg passat towbar wiring


Hi Katrina.
The most common wiring for a 7 pin tow-bar plug is as follows.
E.U.Standard
No 1 Yellow-----Left side flasher
No 2 Blue ---- Fog Lights. (Often un-used)
No 3 White --- Earth
No 4 Green -- Right side flasher
No 5 Brown -- Left side park light
No 6 Red ----- Brake lights
No 7 Black--- Right side park light.
The numbers can be found on the rear of the socket.
However---wiring may differ from Europe to the US.
All the best
John

Aug 31, 2009 | 2003 Volkswagen Passat

2 Answers

Tow bar trailer socket wiring connection point to car wiring?


The connectors for towing wire harnesses on foresters are generally on the passenger side, below the rear taillight inside the cargo space. some require pulling up the foam block that is between the spare tire compartment and the taillight. Check where you replace the tailights from inside the car, if there isn't a matching connector hanging out there, check around the spare tire compartment, see if you can remove the carpeted foam block next to the compartment and find the plug under there.

Jun 03, 2009 | 2006 Subaru Forester

2 Answers

Tow bar wiring


Search online, it should be plug and play. The side panel has a plug, pretty simple.

Aug 24, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...