Question about 2009 Nissan Murano SL
Checked all fuses, battery, key fob, inside button as well as the button on the lift gate itself. Dealer wants $400+ to change them out. can get online for $44 and put in myself but it wont open right now
Please explain the language here as iam at a loss -LIFT GATE??? do you mean the back door or tailgate ,sorry its getting late in this time zone and i think its near my bedtime
Posted on Nov 20, 2014
Testimonial: "yes the back hatch is called a LIFT GATE."
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: where,s the key hole
Go to the front passenger side door and prise off the rear section - on close inspection you will see that it has a key symbol on it, the key hole is underneath.
Posted on Oct 26, 2008
SOURCE: The rear power lift gate
You most likely have a failed switch in the rear gate jamb. This switch tells the system that the gate is closed and if the system thinks that the door is already open, it will not open it again.
Have the Body Control Module (BCM) scanned for codes and live data with a scan tool capable of accessing this information. This will tell you if the switch is operational by manually operating switch while monitoring the switch state with the scan tool.
Any shop with a decent scan tool should be able to do this. Nissan dealerships use Consult-II and now Consult-III scanners and have access to stuff the aftermarket guys don't get, but this should be accessible by nearly any higher end scanner like a Snap On Ethos, Solus, or Modis.
Hope this is helpful!
Nissan Scope Technician- 10+ years experience in Nissan dealership.
Posted on Nov 17, 2008
you may have to replace the remotes and then have them reprogramed for the car because they do go bad but if there is an autozone near you they will test the remotes for free
Posted on Mar 01, 2009
Check the locking solenoid / actuator in the door behind the panel, could be burned out or loose wire. It should take about 20-30 minutes to open, fix it and close the door panel if there's no major problem. Autozone might be able to help out with a solenoid.
Posted on May 17, 2009
FIRST REMEMBER THERE ARE SEVERAL FUSE BOXES.. NORMALLY THE CIG FUSE IS IN THE UNDER HOOD POWER DISTRIBUTION CENTER OR FUSE BOX.... A VERY GOOD RULE OF THUMB I HAVE FOUND IS TO CHECK ALL THE FUSES IN THE FUSE BOX....THIS USUALLY PREVENTS CHECKING THE WRONG FUSE AND IT ONLY TAKES A SECOND TO DO IT
Posted on Sep 01, 2009
Tips for a great answer:
Jun 09, 2017 | Cars & Trucks
Mar 03, 2017 | 2009 Jeep Patriot
May 29, 2016 | 2008 Pontiac Torrent
Jun 24, 2017 | 2004 Buick Rainier
Jul 07, 2012 | 2006 Chrysler Town & Country
Nov 22, 2009 | 2005 Lexus RX330
Aug 25, 2009 | 2000 Renault 181
Apr 02, 2009 | 1998 Mercury Grand Marquis
462 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: