Question about 2005 Chevrolet Malibu
Do you want the heat off or are you trying to turn the fan off?
Posted on Nov 20, 2014
Could be numerous things. First off check the heat control valve to make sure it's working properly. If the valve is working properly then proceed to checking the heater core. See if your getting good coolant flow. If you are then go to checking switches and resistors. Most probable cause is heater core blockage or stuck heater control valve.
Posted on Nov 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your blower speed resistor has gone bad and needs to be replaced. You can pick one up at Auto Zone or Parts Source with the step by step instructions to getting the resistor replaced with common tools.
It is located under the glove box, way in the back of the passenger foot area. You'll need to remove 2 screws with a 7mm socket, and remove the plastic cover that covers the blower motor and another component box that I think controls the passenger airbag. After removing the plastic cover you'll need to side that passenger airbag module to the right so it pop off its mounting bracket and move it out of the way. That will give a better view of the blower motor. I highly recommend you also remove the blower motor itself because the Blower Motor Resistor is located behind it. I think you'll need a 5mm or 5.5mm socket to remove the 3 screws that hold in place the blower motor and 2 more screws for the Blower Motor Resistor... It's a cramped location to work in but if you have all the tools and enough lighting then it shouldn't take more than 30-60 minutes to do. The Blower Motor Resistor costs about $19-$25. Good luck
Posted on Nov 30, 2009
Is the car tempature gauge working ? Another words is the car operating at tempature? it could be just that your thermostat is stuck open and probably needs replaced
Posted on Dec 05, 2008
The switch need to be replaced. This is a common problem. Understand that he switch is the only breakpoint in that system. If the seat is getting hot without the switch being pressed, there is a short in the switch, thuis the necessary replacement.
Posted on Mar 21, 2010
Tips for a great answer:
Oct 11, 2015 | 2005 Chevrolet Malibu
Apr 05, 2014 | 2005 Chevrolet Malibu
Jun 21, 2010 | 2005 Chevrolet Malibu Maxx
Dec 14, 2009 | 2005 Mazda RX-8
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: