Question about 1994 Mazda 929

1 Answer

Cut the red wire underneath the dash near fuse box? Is that the area that I look for red wire to disconnect the car alarm on the 1994 Mazda 929?

Got an answer on this site, but not sure where the red wire is located. please be specific of the area of the car. This is my first time doing this. Thank You.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 14,585 Answers

Cutting a wire on a car that already has a security issue won't fix the problem. The car has to be running and/or on before you cut any wires. It is called severed wire defaults. the computer loses communications with security and goes to default, which lets the car run. Cutting wires when the car is not running or on, only makes things worse for someone to fix. And to my knowledge... No vehicles has a red wire for data. Which is the wire to cut.

Posted on Nov 21, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

How to disconnect the alarm system .


just cut the red wire and isolate him

Nov 20, 2014 | 1994 Mazda 929

1 Answer

My headlights stopped working. I can't find the


next to the battery is all the high amp fuses, if not it find the fuseable(a fat part in the wire) check it on both sides for voltage. if it is bad be sure to replace it with a link with the same rating, failure to so may result in a expensive wire melt down or a fire

Sep 24, 2014 | 1994 Mazda 929

1 Answer

How to remove car alarm


I take it the alarm is a after market one. look under the dash on the drivers side next to steering colunm there should be some wires there with a fuse in 1 or 2 . you need to pull the fuses. sending you a picture to give you a basic idea.1_26_2013_11_15_58_pm.jpg

Jan 26, 2013 | 1992 Mazda 929

1 Answer

The car alarm goes off often and for no apparent reason. I would like to just unhook the alarm.


This is going to be hard without a picture but bear with me go under the dash there you need to find the alarm relay then find a small transducer with those found find its ground you wil be able to identify it cut it. or better yet disconnect the transducer you find a small 4 X 3 inch box it wire is aftermaket black tape disconnect it, or cut it with engine off key off , then find where they tap in to the ignition wire you will see where your wire started and got cut and when into a relay find the other half cut it and restore the ignition where it was bypass, find you sucessfully eliminated the alarm cut the alarm horn or bettery yet just remove the alarm fuse and cut the alarm horn you will see it when you are under the dash manufacture wires are nice a clean and aftermarket alarm installer there wire is messy wrapped in tape on tape

May 08, 2011 | 1997 Buick LeSabre

1 Answer

Fuel is running out on the ground from near the firewall, at the center area of the motor. It's not the pump, but I'm not sure it is the fuel pressure regulator either. Any way to tell without pulling...


it has been a while since i worked on one of those, but if i remember correctly there is a metal fuel pipe underneath the car that changes to a rubber pipe in that area. it can be checked quite easily from underneath the car. if you can raise the car SAFELY or get under it in a pit, you should be able to see where the fuel is coming from. the chances are it is a broken pipe or loose connection rather than a component failure

Feb 23, 2011 | 1994 Mazda 929

1 Answer

Dash panel lights will not come on


CHECK DASH LIGHT FUSE.IF FUSE GOOD DASH HAS BROKEN GROUND WIRE OR DASH IS FAULTY.

Nov 21, 2010 | 1994 Mazda 929

1 Answer

Trying to find the fuel filter on my 1994 mazda 929


Under hood, passenger side, front engine area, rear of battery, above wheelwell, mounted in fuel line assembly

Feb 03, 2010 | 1994 Mazda 929

1 Answer

The license plate lights on my 1994 Mazda 929 do not come on. Since both lights (on either side are not working, I suspect that the fuze may be the problem. I would like to know where to locate the fuze...


One fuse box is located in the driver side kick panel. There are two other places where fuses/relays are located under the hood. One on the driver side & the other on the passender side nearthe battery.

May 14, 2009 | 1994 Mazda 929

Not finding what you are looking for?
1994 Mazda 929 Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...