Question about Cars & Trucks

1 Answer

I have a 06 Chrysler 300 it looses power while driving . Mainly when I come to a stop sign or traffic light but it only does it some time

Posted by on

  • John Hart Nov 20, 2014

    Hi Mario Maldonado, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Does the engine stop running or what. Normally when stopped you do not need any power, unless you are talking about starting off from a stopped position. Would you provide more information. Also get the Powertrain DTC's from a code reader. Get codes by pushing in the trip odometer reset and turn the key to the on (engine off) position then to off, then to on, then to off, then to on and then read the codes in the odometer digits. Post codes with additional info.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check your throttle positioning sensor,

Posted on Nov 23, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: car stalls at traffic lights and stop signs

it could also be the idle control valve not working properly, it could be carboned up, remove and clean with a cloth then replace and try car

Posted on Apr 15, 2009

  • 370 Answers

SOURCE: my 2002 Ford stalls upon take off after car warms

check your fuel regulator, pull the vacuum line off and see if its leaking fuel by the diaphram inside...
if you need more info just comment and we can trouble shoot this with you

Posted on Aug 23, 2009

  • 100 Answers

SOURCE: oil light comes on when stopping at stop signs or

Have you checked the oil level? Sounds like it's extremely low....:-)

Posted on Dec 23, 2009

  • 1244 Answers

SOURCE: GMC Envoy 2002. When I get to traffic stop light.

check your vaucumn hoses for leaks any leak in that system will effect your fuel pressure regulator and fuel rail that controls the running ability

Posted on Jan 14, 2010

  • 1 Answer

SOURCE: 06 chrysler 300 wiring harness diagram

Need color wire diagram to bypas the ignition transponder. I have the module and the chip key.

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When stopped at traffic light or just stopped with motor running it has a jerking motion, have just had one of the fuel injectors replaced, it looses power when driving has plenty of power taking off

If you have a check engine light on, pull the code. Jerking while stopped is often a sign of needing a tune up, but it can be other things too. If it's been a while since last tune up, change plugs and wires.

Feb 04, 2016 | Cars & Trucks

1 Answer

I have a 2006 Chrysler 300 and it loses power while driving . So I have to turn if off and crank it back in order for it to keep driving but mostly happens when I stop at a traffic light or stop sign

So your not aware you have any sort of vehicle
problem-- that needs a dealer or repair shop-- to
diagnose ??

Stop using it & get it repaired

I losses power to protect the exhaust converter,transmission
or other systems from damage,that is the way it is supposed
to work-- so you stop using it-- before you damage it

Nov 20, 2014 | 2006 Chrysler 300

1 Answer

After long drive 30,40 km when car stops on traffic lights loose power 2010 outlader

is your check engine light on it could be anything from fuel to emissions

Aug 01, 2012 | 2010 Mitsubishi Outlander

1 Answer

My 07 Chrysler 300 (Standard) steering wheel locked up while car is in drive. I was unable to steer,(car coasts), lights still on, full tank of gas. What is causing car to cut off out of nowhere? This is...

If I understand you, the steering wheel will not turn. Or is it that it is hard to turn? If it doesn't turn at all, I would not drive the car at all until it is repaired. If this should happen to you on a turn or when traffic stops in front of you, you could kill someone. It is not uncommon for a car to go into a slow speed mode, but what you describe is very dangerous.

Aug 02, 2011 | 1999 Chrysler 300M

2 Answers

Where is the fuse for the speedometer on a 06 Chrysler 300? Yesterday my speedometer stopped working on the drive home. Before I take it to a shop I want to check to see if it may be fuse related. Can...

I was unable to find anything on the fuse for just the speedometer, with the other gauges in the cluster working correctly. Below are instructions on how to test your instrument cluster. This will confirm whether or not the problem is within the cluster itself or somewhere else. I hope this will get you started on your problem or hopefully solved.


Mar 13, 2010 | 2006 Chrysler 300

2 Answers

I have '06 chrysler 300 i have problem with

You will have to get a new e c m ,computer,the voltage regulator for the alternator is in the computer( E C M ).

Mar 08, 2010 | 2006 Chrysler 300

1 Answer

The car want turn over it gives no signs of power but everything works the lights come on the radio the dash but no crank

could be associated with starter, also could be battery cables, check for looseness or white color on cables.

Feb 16, 2010 | 2006 Chrysler 300

1 Answer

06 chrysler 300 wiring harness diagram

Need color wire diagram to bypas the ignition transponder. I have the module and the chip key.

Jan 19, 2010 | 2006 Chrysler 300

1 Answer

Oil light comes on when stopping at stop signs or traffic lights

Have you checked the oil level? Sounds like it's extremely low....:-)

Dec 23, 2009 | 2003 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides