Question about 1992 Toyota Corolla
I have pulled off the throttle body but the part that i have seen online is not attached to my throttle body. thanks
The idle air control valve should be on or extremely close to the throttle body. But half of it might be hidden because its inside of something so look for parts that look similar but maybe arent as big
Posted on Nov 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the MAF sensor is between the air filter and throttle body. the idle controll is at the throttle body.
Its located on the throttle body on the left side. Follow the air intake to an intake manifold which sits on top of the throttle body.
Posted on Jan 05, 2009
There are two fuse boxses, one located underneth the dash on the drivers side kick panel, also one located under the hood on the passenger side fenderwell by the windshueld.
Posted on Mar 23, 2009
The fuel filter is located on the firewall, in front of the driver side of the car, very low.
PLEASE NOTE: This can be a real exercise in frustration, as the filter and the threads from the fuel pipe usually lock themselves together. Removing the filter almost always destroys the threads, on the fuel delivery tube, and you may have to replace the fuel line to the tank. I am telling you this up front so if and when you remove the filter, you can expect a 96% chance of needing to replace the fuel line to the tank.
In short, if you are not 100% sure that the filter REALLY needs changed, don't do it. This can be a REALLY big job, and really expensive. If the car is just running poor, the fuel filter is the LAST thing that will cause you problems.
Posted on Mar 26, 2009
SOURCE: 1993 Toyota Camry IAC cleaning
1) remove the black intake hose from the throttle body
2) get a can of throttle body/intake cleaner
3) be VERY careful if you decide to use the straw included with the can of cleaner, it can detach and go inside of your intake manifold.
4) spray inside and use a rag to remove junk from throttle plate(front and back side), hold the straw on the cleaner can and spray into the hole just ahead of the throttle plate, let soak for 10 minutes or so
5) reattach intake hose and start engine - you may get black smoke/rough idle for a minute as junk exits the engine
Posted on Jul 22, 2009
EGR stands for EXHAUST GAS RECIRCULATION.
This is a loop back system between your exhaust manifold and the underside of your filter.
The EGR valve is located between the inlet (exhaust manifold) and the outlet (intake manifold).
About 8-12" below the air filter....toward the passenger side.
EGR carbon built up can be clean.
Check the soft membrane on the EGR valve and see is it crack/torn. If it's in good shape then you may reuse it.
The professional use a vacuum hand tool to determine the travel of the EGR.
There are carbon built up inside the EGR air passage tube too,
Make sure you give both a good cleaning.
The EGR base gasket MUST BE REPLACE!
Order one before you start the job.
Please post more info on the comment window.
Posted on Aug 31, 2009
Tips for a great answer:
Jan 30, 2015 | 1992 Toyota Corolla
Feb 15, 2013 | 2006 Toyota Corolla
Nov 30, 2010 | 1995 Toyota Corolla
Apr 12, 2010 | 1991 Toyota Corolla
Oct 16, 2009 | 2003 Toyota Corolla
Oct 14, 2009 | 1992 Toyota Corolla
Jun 18, 2009 | 1991 Toyota Corolla
Jun 07, 2009 | 1992 Toyota Corolla
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: