Question about Ford Crown Victoria
Just asking, have you checked the fuse and the lamps/
Posted on Nov 20, 2014
Testimonial: "If you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your headlights and or tail lights don't work, Ford just finally extended the warranty on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! Ford has extended the warranty to 15 years/250,000 miles. This is NOT a recall. Your headlights must be inoperable in order to get a new LCM on this new extended warranty. It must be done at a Ford Dealer and the fix is free. Call your local ford Dealer and tell them you need to make an appointment because your headlights don't work and Ford has extended your warranty on the LCM. Tell them it is the Customer Satisfaction Program 14N01. Have your car's Vin number ready as they will ask for it. You don't have to be the original owner. If they act like they don't know what you are talking about ask to talk to the manager or tell them to call Ford Motor Company and ask them, or you can call Ford yourself. We had ours done at a Ford dealer in August of 2014 in Scottsdale, AZ. It is a 15 year warranty and if you have a 1999, the deadline might have passed, but call them and ask them to see if it has. Maybe it hasn't."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove the door panel. be very careful and make sure you get all the screws out. Should be maybe 2 on the bottom half of the door, and 2 on the top half. one is right by the handle, which is the one i forgot the first time i took my door pannel off. carefully pull the panel upward, and outward at the same time. Once the panel is off, disconnect the controls, and remove the light from the panel. Remove the plastic cover very carefully, it will tear, just keeps noise, and air, and the elements out.
There will be 3 screws, they are torx bolts, once you pull those 3 out. They are located middle of the door towards the right side. The motor will drop down a little bit. disconnect the wires for the motor, and wiggle the motor off of the regulator. the crown vics have a decent size hole to get into the door panel, you can also remove the speaker if that would help you do it. other than that, it just lining up the new motor into the car, pushing it into the regulator, and putting the 3 bolts in, make sure they are snug, and not cross threaded. put everything back together, and your set.
Posted on Mar 19, 2009
remove plastic ring at rear of light. Pull light out of housing. Lift L-shaped tabs and remove housing if replacing whole lens.
Posted on Aug 15, 2010
Tips for a great answer:
Apr 16, 2014 | 2003 Ford Crown Victoria
Feb 14, 2012 | 1996 Ford Crown Victoria
Sep 09, 2010 | 2003 Ford Crown Victoria
Aug 19, 2010 | 2003 Ford Crown Victoria
Aug 10, 2010 | 2003 Ford Crown Victoria
Jul 23, 2010 | 2003 Ford Crown Victoria
Jun 30, 2010 | 2003 Ford Crown Victoria
Dec 26, 2008 | 2001 Ford Crown Victoria
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: