Question about Cars & Trucks

1 Answer

Instrument cluster malfunction doesn't work after being sent out for repair. It does now light up and my dome light works and my radio works, my high beam indicator works. No tach, no fuel gauge, no

I have tested all fuses I even swapped out the relays I don't know what else to do. I need to test the relays to see I may have one that is blown.

Posted by on

  • James Hornbeck
    James Hornbeck Nov 20, 2014

    Richard thanks for the advise, I plan to do a lot of trouble shooting this weekend. It all started when my over drive button switch shorted out and caused my cluster to go south. I just know I have to retrace my steps recheck all the fuses, check all the connections. I do have dash lights, my high beam indicator lights up. but that is it.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 2,494 Answers

Check plug at back of panel .

Posted on Nov 20, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: gauge lights not working.

Solved the problem -on of the fuses in the relay box under the hood was bad - Although it is not marked well - It says park and horn????

Posted on Feb 10, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

  • 4 Answers

SOURCE: One high beam works one doesn't, gauge cluster does not light up

most honda have a light module under driver side dash panel and this module is often shortcut or burned by the inside (brown connecter)

Posted on Dec 21, 2009

ftw1952
  • 10319 Answers

SOURCE: The high beam indicator is on. The low beams don't work.

You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Posted on Jun 03, 2010

dttech
  • 4803 Answers

SOURCE: 2005 Ford Focus ZX3 SES, the blue high beam

It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

Posted on May 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 wrench light is on


Powertrain Malfunction (Wrench) Warning Indicator (base instrument cluster)
The instrument cluster receives the powertrain status from the PCM over the high speed CAN. When a powertrain system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the powertrain malfunction (wrench) warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the 4WD control module sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator. On 4.6L engines, if the transmission control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator.
better have it checked !
Bett

Sep 10, 2016 | 2006 Mercury Mountaineer AWD

1 Answer

I lost the fuse diagram for my dads 95 dodge grand caravan. Can anyone help me out with one?


#1: Panel Illumination
#2: Guages,Right High beam headlight and the high beam indicator
#3: Rear Wiper, Left headlight High Beam
#4: RH park, backup lights switch and relay,Speed porpotional steering module,power door lock switch illumination and daytime running lights(Canada)
#5: Power Door locks,Power Mirrors,vanity,dome,map,ignition and trunk lights,sunroof,radio,power antenna,body control module and power for the data link connector
#6:Heated mirrors,heated rear window indicator
#7: Instrument cluster illumination,park and tail lights
#8: Cigarette lighter,Radio Amp and horns
#9: Power door lock motors
#10: Not used
#11: Radio
#12:Left low beam head light
#13,14,15,16 not used
26153814-2qh1jtrzfrcszgktlooiom5o-3-0.jpg

Apr 05, 2016 | Dodge Cars & Trucks

1 Answer

Dome lights, insutrument cluster and radio do not work


try checking fuses, if not there, double check for wire connectors not fully inserted during reassembly

Dec 29, 2012 | 2001 Jeep Grand Cherokee

2 Answers

Electral the dash lights are not working


check your dash light dimmer switch. it is usually by the headlight switch, it might of gotten bumped accidently. if this doesn't fix your issue then i need to know if all dash lights are out or just the ones in the instrument cluster.

Oct 26, 2012 | 1994 GMC Sonoma

2 Answers

Dash instruments go out 99 dodge caravan


The first thing to do is reach up (if possible) behind the cluster and make sure the plugs to it are fully inserted, push them in or remove and reinsert if possible to reach them. If that doesn't fix the problem the entire cluster must be removed and then sent out for repair to a shop that repair Chrysler electronics.

Sep 17, 2012 | 1999 Dodge Caravan

1 Answer

Instrument cluster,radio,and no rear parking lights


begin by checking all you fuses on the left end of the dash, if all the fuses are ok you will have to write back. what led up to this problem? ex:car got jump started backwards! hint: the radio fuse and inst cluster fuses are on the left end ,the tail lamp is under hood fuse box,also check if the dome light and glove box light are working

Oct 12, 2011 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

When i turn headlights on...radio lights go out..they come on when i turn dimmer switch..but then dome lights wont go off...tried it on all different positions...2008 patriot


It sounds to me like you may have a defective dimming switch. Are the instrument cluster lights working as they should? Do they dim/brighten with the dimmer? If the instrument cluster is working OK, then it could be an internal problem in the radio unit itself. Your panel lights are computer controlled. The processor in the instrument panel controls them. It uses a digital signal to "tell" the radio to either dim or brighten its lights. If the radio is failing to do so, the radio is the most likely cause since the lights work on "full power" which is also commanded through the same data lines. (this eliminates the signal from the cluster and the connection through the data lines.)

May 23, 2011 | 2008 Jeep Patriot

1 Answer

Looking for the cigarette lighter fuse


Check all fused related to audio, dome light or instrument cluster. Try plugging a cellphone charger into the socket for cig lighter, if this works then you need a new cig lighter.

The cig lighter is probably part of the circuit tied to radio instrument cluster or dome lights, if any of those are out too, then it is likely a bad fuse or bad ground. Look for corresponding fuse and kill 2 birds with one stone hopefully by replacing the faulty fuse.

If you locate and replace a faulty fuse and the problem persists, you may have a bad ground. This is a bit more involved. I would guess by your question that you will need to have someone service it for you.

Oct 29, 2009 | 1992 Mercury Grand Marquis

2 Answers

2003 buick rendevous speedometer gauge malfunction it goes up to high for rpm


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Rendezvous instrument cluster repair

Oct 08, 2009 | 2003 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...