Question about 1995 Ford F250
Tried changinging trans fluid and filter ..unplugging electrical connector and plugging that back in took to trans shop to see if there was a code no code and also put a can of seafoam in truck trans ..it stopped for several days and started again
Look for a bad fuse. It affects shift patterns.
Posted on Nov 20, 2014
Sounds like u have an e4od trans with a torque converter that is slipping when it try's to lock in. if you can live with it drive it if not have a new or rebuilt torque converter put in with a new seal. fords e4od trans have had all updates and modifications as of 1995. mine has been shifting ruff for the last 4 years. I will drive mine until it quits if it does.
Posted on Nov 20, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a speed sensor on the top of the rear differential. either the sensor is bad or it has become unplugged. when the truck doesnt know how fast it is going, the trans goes into "limp mode" to protect itself...whic causes it to shift hard and if u look you'll notice the o/d light is blinking
Posted on Feb 27, 2009
A reason for hard shifting could be a problem with many things with various degrees of seriousness. It could be your ATF( automatic transmission fluid) is low or broken down and old. This would cause the hardness and the reason for stop and go traffic effecting it. Another possibility is your transmission is just shot, and the timing gears inside are worn and not properly shifting at the correct RPM causing a **** during shifting.
Some possibilties, not all!
Posted on Mar 27, 2009
check to see if the ground wire from the battery to the engine is tight if the cable is loose it will cause the injectors to flood the egine
Posted on Jul 12, 2009
First of all get your tranmission fluid and filter changed not flushed, second of all their is a wire underneath that plugs into the tranny that is held on by a bolt clip, if this wires rubs through and grounds out which it usually does it will take out your over drive and the light will flash, your top speed will be 45 MPH.
Posted on Sep 20, 2009
Tips for a great answer:
Oct 15, 2014 | 1992 Ford F250
Aug 05, 2017 | 1995 Ford Explorer
Nov 16, 2017 | 1997 Ford F250 SuperCab
Sep 05, 2011 | 1995 Ford F250
Sep 06, 2010 | 1997 Ford F250 SuperCab
Mar 23, 2010 | 1995 Ford F250
Oct 02, 2009 | Ford F-250 Cars & Trucks
Jul 15, 2009 | 1995 Ford Explorer
Oct 11, 2008 | 1994 Ford F250 Supercab
Jul 07, 2008 | 1996 Ford F250 Crew Cab
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: