Question about Peugeot Cars & Trucks
IF IT JUST MAKES A WIZZING SOUND AND NOT THE NORMAL SOUNDS ON TURNING OVER,IT MAYBE THAT THE TIMING BELT HAS SLIPPED.SAME THING HAPPENED TO MY WIFE,S POLO ONE DAY,IT TURNED OVER AS NORMAL THEN STARTED TO MISS FIRE AND NEXT TIME I TRIED TO TURN IT OVER,IT JUST MADE A LOUD SPINNING NOISE.IF THE BELT HAS SLIPPED,IT MAY HAVE DAMAGED YOUR ENGINE BUT IF YOU ARE LUCKY,BELT NEEDS REPLACING,STILL PRICEY AT A GARAGE THOUGH.
Posted on Nov 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: peugeot 206 glowplugs
If your not good at mechanicing I suggest you take the car to someone that is experenced.
The reason I say this that we have loads of cars into the workshop with glowpugs broken in the head of the engine with the result of us having to remove the cylinder head.
What happens is that the tip of the glowplug breaks in the head when being removed if it is not done properly.
There is a way that we have found that they can be removed easily without breaking them.
Firsty run the car engine until warm, then we pour a little Diesel fuel onto each plug & let them sit for 15mins or so.
Then we remove them with a deep socket 1/4" drive so we don't put to much pressure on them.
they should screw out easily but we turn them out 1 whole turn then back a 1/4 add a little more diesel ( thimble full) & gently screw them out.
If they start to get really tight screw in again a little then screw out again.
The nuts that hold on the wires just need to be nipped up with a small 8mm spanner, but do not over tighten.
Posted on Dec 11, 2008
i can't find a manual for that car... but it is likely the wiper relay and is likely located in the fuse panel near the battery in the engine compartment.
Posted on Mar 23, 2009
It seems like the clutch pressure plate has given in. Best would be to replace the clutch pro-kit.( Clutch pressure plate, clutch plate and release bearing)
Posted on Sep 03, 2009
Testimonial: "A mechanic said basically the same to me today, so I'll be getting it replaced. Nice one knight :)"
Tips for a great answer:
Sep 20, 2012 | 2005 Peugeot 206 GTI
May 17, 2010 | Cars & Trucks
Oct 23, 2009 | 2005 Peugeot 405
Sep 29, 2009 | Peugeot Liberte Cars & Trucks
May 24, 2009 | 1991 Peugeot 405
Mar 23, 2009 | Peugeot Liberte Cars & Trucks
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: