Question about 2004 Pontiac Grand Prix
Not workingcheck Looking for electrical connector to check voltage and continuity
Remove the interior panel usually drivers side,inside of car at rear glass. connection solidered on
Posted on Nov 20, 2014
Should be a connector under the rear window, inside the trunk.
Posted on Nov 20, 2014
In the fuse panel inside the passenger side door. The panel cover pulls of from the side of the dash board and should have a schematic printed on the inside of the cover.
Posted on Nov 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: rear brake pads
The rear calipers have to be turned back in, not pushed. There is a tool, but rather than spend the money... I have used a 11/16 wrench. Slips at first until you get it started, but then the calipers turn pretty easily.
Posted on Dec 22, 2008
I own a 2001 Pontiac Grand Prix GTP and may be able to help you out if you let me know what specifically you are looking for.
Posted on Jan 02, 2009
It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.
Posted on Jul 01, 2009
Does it try to come up, EG is there power being applied when you press the UP switch? if it makes no sound or movement when pressing the UP switch it is probably a worn out switch - available at Pontiac dealers though you may have to order it and wait a few days - have your VIN number for the parts desk and you'll get the part in no time - the switch levers out of the panel - use a plastic tool if possible to prize the switch out so you don't damage the surrounding trim - the cable connector clips off the old switch and goes on the new switch, press the switch home into the recess and jiggle it a bit to make it dead flat - window should work now.
If it IS making an effort to come up then either you have a poor earth or power connection making it so there is not enough power to pull the windows up (which is harder than down due to the weight of the window) -- check the cabling behind the door panel, and as above pull out the switch and check its connector too.
OR... the window is out of alignment and is jamming - putting it back in alignment means taking off the door panel and getting at the bottom of the window runner, loosening the bolt(s) on the bottom of the runner and moving it sideways so it hold the window steady but not tightly, you may have to try having it tighter or looser against the window till you get the best performance - also oil the moving parts/cables of the window mechanism (dont get oil on the glass, it will smear for weeks) to give the best chance of smooth operation.
Posted on Jan 25, 2010
Tips for a great answer:
Feb 28, 2013 | 2004 Pontiac Grand Prix
Nov 11, 2011 | 2004 Pontiac Grand Prix
Oct 06, 2011 | 2004 Pontiac Grand Prix
Feb 14, 2011 | 2004 Pontiac Grand Prix
Nov 03, 2010 | 2004 Pontiac Grand Prix
Removal & Installation
Fig. Location of the fluid level sensor
Oct 16, 2010 | 2004 Pontiac Grand Prix
Jun 05, 2010 | 2004 Pontiac Grand Prix
Apr 09, 2010 | 2004 Pontiac Grand Prix
Sep 12, 2009 | 2003 Pontiac Grand Prix
134 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: