Question about Ford Taurus
V6 3.0 liter 4 door 2000 ford taurus se
There are 6 on the block and 2 or more on each head. Getting the ones on the back of the heads are the tough ones.
Posted on Nov 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Starting at the crankshaft pulley, and going clockwise, the belt leaves the crank pulley,
Goes around the tensioner,
Goes around the water pump
Goes around the alternator
Goes around the upper idler
Goes around the Power Steering pump
Goes around the air conditioner pulley
then goes back to the Crank pulley
Posted on Sep 15, 2008
Taurus doesn't have what is called a heater control valve,are you reffering to the remote climate control module,the one that the vacuum lines hook to? If so it is behind the glove box. Just open the glove box and press the 2 clips on the sides so it opens all the way up and it will be located right behind this.
Posted on Jan 29, 2009
on ataurs with a duratec the thermostat is on the bottom radhose underneath the car. you will see a little housing near the radiator underneath the vehicle. they are a bit of a pain to get at
Posted on Feb 13, 2009
SOURCE: i need a serpentine belt diagram
Below is a link that should be able to help.
Just choose the make, model, engine. Then in the list that opens there will be a link to a belt diagram. I just went through it so it should work for you.
Posted on Aug 30, 2009
On 3.0L OHV engines, the oil pressure sensor is located on the left
side of the engine block above the flywheel. On 3.0L DOHC engines the
sensor is located on the left side of the engine block above the oil
filter. On 3.4L DOHC engines the sensor is screwed into the oil filter
adapter. The oil pressure sensor operates the oil pressure warning lamp.
Fig. 1: Location of the oil pressure sensor-3.0L OHV engines
Fig. 2: Location of the oil pressure sensor-3.0L DOHC engines
Fig. 3. The oil pressure sensor-3.0L OHV engine
Hope help with this (remember rated this help). Good luck.
Posted on Feb 18, 2010
Tips for a great answer:
Jul 31, 2015 | Ford Cars & Trucks
Nov 19, 2014 | 2000 Ford Taurus
Nov 05, 2012 | 2000 Ford Taurus
Jul 17, 2011 | 2000 Ford Taurus
Mar 05, 2011 | 2000 Ford Taurus
Dec 06, 2010 | 2000 Ford Taurus
Jun 29, 2009 | 2000 Ford Taurus
Mar 30, 2009 | 2000 Ford Taurus
Jan 28, 2009 | 2000 Ford Taurus
144 people viewed this question
Usually answered in minutes!