Question about 2010 Chevrolet Equinox 1LT
2.4 liter engen
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
replace the fluid in the transmission with the new DEXRON 6 fluid, it in many cases this new synthetic fluid solves this kind of problem, also replace the fluid filter while u are at it.
Posted on Mar 27, 2009
hopefully that does not have tilt steering which makes the job somewhat more difficult. the same thing happened with a van i owned. there are small arms inside the steering column that move with the key to move the ignition switch.
to confirm it is broken locate the ignition switch on the column. remove it then turn the key. if the piece that normally moves that switch doesn't... than it is broken.
first unhook the battery.
about the only way to get at it is to remove the steering wheel. there are more parts behind that that have to be removed. then you will get to what is basically and end cap. remove that and slide out the parts and install the new arm(s) mine was a 2 piece.
basically you just need to bolt it back up and reinstall the key cylinder and you are good to go. hook up the battery again and you should have a working vehicle.
the tilt springs can be held together with a c clamp. it is tricky but you will see as you attempt it.
Posted on Nov 28, 2009
NO!!! you could possibly ruin your alternator, to stop your car from running find the air intake, and cover it with your hand , it will cause the motor to stop. Then remove battery terminal from the Neg. pole. The key should not be able to come out of the switch when car is running. Your shifter as a switch that is activated when the car is put in park or neutral to remove key.
Posted on Jan 11, 2010
Testimonial: "thanks you very much! I am calling the dealership in the morn and having it towed in."
a number of issues. Tcc regulator bore worn out, the infamous check ball seat it hammered badly, or/and calibration issues. I have seen all three issues on the same trans - often!
Posted on Aug 05, 2010
Tips for a great answer:
Aug 19, 2015 | Cars & Trucks
Nov 19, 2014 | 2010 Chevrolet Equinox 1LT
Nov 10, 2014 | 2004 Toyota Sienna
Jul 27, 2014 | 2007 Chevrolet Aveo Sedan
Feb 01, 2012 | 1999 Chevrolet Silverado 1500
Aug 19, 2017 | 2006 Chevrolet HHR
Aug 12, 2009 | 2006 Nissan Altima
Jan 01, 2014 | 2010 Chevrolet Equinox 1LT
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: