Question about Cars & Trucks
I went to turn it on last night, and found that it was already on. I switched it from "remote" to "off" and then this morning, switched it back to remote to see if it would work. It seemed fine at first, but upon checking later, it was on by itself again.
You might have accidently turned on the timer settings.
Select manual option if it's on auto.
Posted on Nov 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car won't turn over
Neutral safety switch may be going bad or is out of adjustment. Switch is on the transmission under the shift linkage ear where shift cable attaches. Loosen it and put car in reverse (not running) turn switch so that reverse lights come on. semi-tighten switch and check that it starts in both park and neutral. If not you need to change the switch.
Posted on Apr 25, 2009
I have a 98 chevy silverado also. I had same problem. My problem was located in the battery terminal. You need to take the terminals screws off and clean them good. You can not tell by justing looking at the terminals from fixed position. The corrosion was on the thread of the bolts itself.
Posted on Aug 24, 2009
could be but have car scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point---may be a mileage service request or may have a problem they car also reset the code for u
Posted on Nov 01, 2009
hi this could be due to your hydraulic tappets, these will start to rattle if the oil has been low at some stage and the oil was to thin this normally sounds worse in the mornings on first start and gets quieter as the day goes on or disappears altogether, what you could do, is use an engine flush, put it in the engine and run it for a period of time, then empty the oil and refill with a thicker grade oil and see how that goes..hope this helps
Posted on Feb 24, 2010
Tips for a great answer:
Oct 03, 2014 | Cars & Trucks
Sep 08, 2014 | 1997 Lexus ES 300
Oct 16, 2013 | Cars & Trucks
Jan 25, 2011 | Honda Civic Cars & Trucks
Nov 09, 2010 | 1997 Chevrolet Lumina
Feb 06, 2010 | 2001 Ford Taurus
Jun 22, 2009 | 1995 Volkswagen Jetta
May 21, 2009 | 2000 Toyota Camry Solara
Dec 24, 2008 | 2004 Chevrolet Avalanche
Dec 13, 2017 | Cars & Trucks
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: