Question about 2007 Nissan Versa 1.8 Sl Hatchback

2 Answers

I cant get my key out of ignition

Im in park ..engine is off

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Go to lock smith and get another key made so your able to get in and out of your locked vehicle and if possible leave existing key in ignition...cheap fix, I had the same issue and they charge a small fortune for ignition replacement ! good luck

Posted on Nov 18, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Alzo try With the car in neutral

Posted on Nov 18, 2014

  • Paul Bade Nov 18, 2014

    You may have to work the shift lever around a bit if the linkage to the lock mechanism is out of adjustment.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lights comme on but wont start ignition or starter


what lights? name them>?
what year caar.
the word is CRANK does the engine crank fast?
no cranks. (if it cant crank it cant start, unless like my M/T pushed or gravity started)
1: check fuses first.
2: jumper cable crank it. that work>?
if not say so.
yes, then your battery was dead for 3 reasons. ask.
no, then the starter need to be hot wired and tested. for bad key line.
will it crank in A/T neutral , not using PARK
as the operators guide shows?

Apr 13, 2015 | Jeep Liberty Cars & Trucks

1 Answer

Key stuck in ignition, car won't show in park position


sounds like the cable from shifter has loosened and is not moving far enough to register it is in park to allow it to release key should be a simlpe enough fix ,buti have not worked on one of those to help you further , alocal mechanic should be able to help u without too much hassle Good luck

Jan 14, 2014 | 2004 Chevrolet Monte Carlo

2 Answers

Astrostart won't start the car


You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx

Nov 27, 2012 | Cars & Trucks

1 Answer

The ignitioe will not turn out of the off position, the steering column will not lock and transmission shifter depresser button presses but will not move out of park.


SOUND LIKE IGNITION SWITCH KEYLOCK CYLINDER BROKEN. IN WHICH YOU CANT GET CAR OUT OF PARK.THE KEY LOCK CYLINDER BY TURNING THE KEY.IT MOVES A GEAR AND RACK ASSEMBLY THAT IN TURN MOVES THE IGNITION SWITCH ACTUATOR ROD AND PLUNGER TO VARIOUS POSITIONS REQUIRED FOR PERFORMING IGNITION SWITCH FUNCTIONS. IF KEYLOCK BROKEN YOU WONT BEABLE TO TURN IGNITION KEY OR GET CAR OUT OF PARK.

Mar 26, 2011 | 1999 Oldsmobile Alero

1 Answer

Key will not come out of ignition when engine is turned off and steering wheel won't lock. Key is released after disconnecting battery.


im thinking it mght be somthig to do with your linkadge . it might not think it,s in park ...take a look it,s my best id

May 30, 2010 | 2002 Ford Explorer

1 Answer

1991 buick park ave wont start


Typically,fusible links protect everything but the starter. I'd check them anyway & they're down at the starter. Also,make sure the engine isn't siezed,3.8's freeze all the time. Yes,that would mean the engine is toast. Also the transmission has a clutch in it & it could be locked in the on position. You can unplug the 4 pin connector in front on the trans & see if that makes a difference. Write back if you need more help

Jun 21, 2009 | 1991 Buick Park Avenue

1 Answer

1996 Cavalier ignition switch will not start car.


you apparently have the link either disconnected or bound up at the key end, it may even be disconnect or out of place. If you loosened our outherwise move the lower end switch tou may be able to realighn what is out of whack Good Luck-Ned

Jun 16, 2009 | 1996 Chevrolet Cavalier

1 Answer

Cant shift into park and key stuck in ignition


USE A WRENCH AND STREACH THE KEY HOLE WORKED FOR ME!!!

Mar 26, 2009 | 1994 Mazda MPV

2 Answers

Key stuck in ignition


spay some DW40 in the key slot and wait abut 5 to 10 mins. wigger the key, and slide it out.

Nov 03, 2008 | 1998 Chrysler Sebring

2 Answers

I cant get the key to go to the off position


omg forenzas just simply ****... i know because im a mechanic and my friend has one and theres always something wrong... wah wah... just do what i told him: tow it and sell it!!

Jul 27, 2008 | 2006 Suzuki Forenza

Not finding what you are looking for?
2007 Nissan Versa 1.8 Sl Hatchback Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...