Question about 2002 Toyota Camry Solara
Where is the fusible link located
Found this on the web. not sure if this will help you:
Battery changes (203)
Needed will be a set of leads and a slave battery,
push the red button on the bonnet stay in to open the bonnet to its full
just next to the battery you will find a red cap with a + on it, this is the so call jump point, this is where you would connect your positive lead from the slave battery, on the off side you will find an earth point bolted to the top strut, use this for your earth lead from slave battery, now the car is live, disconnect the positive lead from the battery and tape up fully, this will stop any shorts, where the lead comes thought the plastic, you can lift up the small bit of trim and remove lead right out the way, just be aware that the clips holding this trim are very sharp, then what I do is pull the lead right out the way and tuck it under the brake pipes, hence the tape, disconnect neg lead and battery clamp, replace battery, do not disconnect slave battery until both leads are back onto new battery otherwise damage COULD be caused.
Read more: http://mbworld.org/forums/c-class-w203/115277-list-faults-occur-after-disconnecting-battery-4.html#ixzz3JRFnUjNe
Posted on Nov 18, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this link may help you guys. You'll have to check a few to find what you need but I suspect, if you can interpret the drawings, you'll narrow it down, otherwise take a copy to your mechanic, and it might help him.
( http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004d7c3 )
Posted on Nov 30, 2008
I am not sure about "fusible link", But the suggeation I can give you is to open dash or where the outlet is located and check the wires in the back of outlet with a light tester.
Posted on Jun 03, 2009
SOURCE: 1992 Toyota Camry won't crank
Check the ground cable going from the battery to
alternator, then to chassis. Make sure there is no
rust at the chassis ground wire terminal, and that it
is very tight. The fusible link will be off the alternator
red power cable,usually, but not 100% on that car.
Posted on Mar 30, 2010
Tips for a great answer:
Jan 10, 2015 | 2002 Dodge Dakota Club Cab
Nov 29, 2011 | 1996 Toyota Camry
Nov 01, 2011 | 1998 Toyota Corolla
Jun 17, 2011 | 2002 Toyota Camry
Sep 19, 2009 | 1993 Toyota Camry V6
Aug 13, 2009 | 2005 Toyota Tacoma
Jun 25, 2009 | 2007 Toyota Corolla
Sep 14, 2008 | 1997 Toyota Camry
Jun 23, 2014 | 2002 Toyota Camry Solara
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: