Question about Cars & Trucks
First thing to change is the coolant temp sensor . this acts as the choke for these cars and you are not getting enough fuel when cold
Posted on Nov 18, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your charging system is not working,so your car is working only on batt. power,when batt.gets weak car will cut off! good chance alter nator is defective! check alt.elect. connections at alt,if con.are good its alt.
Posted on Apr 21, 2009
First, disconnect the battery. Then the only part that needs to be removed to access the starter is the rubber air plenum boot between the throttle body and the air filter housing. This allows enough room to get an arm in there to access the 14mm bolts that attach the starter to the transmission. After removing the bolts, the starter can be removed from underneath the car. lower it down as much as possible, and unbolt the power cable. You may have to twist and turn it a bit to get around the support between the engine block and intake manifold, but it will come out.
Posted on Feb 07, 2010
Did you check the transmission fluid level? If necessary, add fluid. However you probably have a more serious problem. Take the car to a qualified transmission mechanic.
Posted on Feb 27, 2010
Tips for a great answer:
Nov 17, 2014 | 2000 Hyundai Elantra
Mar 06, 2014 | 2004 Hyundai Elantra
May 15, 2013 | Cars & Trucks
Mar 04, 2013 | 2007 Hyundai Accent GS Hatchback
Aug 24, 2011 | 2000 Hyundai Elantra
Jul 11, 2011 | 2000 Pontiac Grand Prix
Mar 23, 2011 | 2000 Hyundai Elantra
Jan 18, 2011 | 2000 Hyundai Elantra
Dec 13, 2017 | Cars & Trucks
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: