Question about Cars & Trucks

1 Answer

Hi i have a boost control on my 99 forrester gt an running 10.5 pound boost but car is running ruff every time i put my foot down iv change plugs leads an still having problem what could it be

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

This engine had a problem with the ignition coil which resulted in the problem you describe, i.e., missing and rough running under load. I\'ve attached and ad for a replacement coil that also suggests that you clean and re-secure the coil ground and check or replace the Crank Position Sensor. Hope this helps.

(Read reviews)



Diamond Ignition Coil






Retail Price:

$179.95


Sale Price: $132.24


with FREE Shipping



Quantity:




Select Year
1999
2000
2001
2002
2003
2004






In Stock






Part Number: 346-01198019


Detailed Notes: 4 Pin Electrical Connector To Coil ** To Insurance Proper Function and Prevent ********* Failure, Coil Must Be Properly Grounded, Also Check Crank Position Sensor For Proper function. ** New Securing Bolts May Also be Required**

Posted on Nov 18, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 136 Answers

SOURCE: how do you change spark plugs and wires

Remove the plastic coil cover from the middle of each valve cover. Remove the coils. Unscrew and remove the spark plugs. Installation is the reverse....

If you have wires, you have three coils and not six and you've actually got wires. To remove one end of a wire, first twist, then pull. If it won't twist, use spray silicone lubricant.

You may have a large plastic beauty cover over the top of your engine. If it's in the way, remove the four nuts and the cover.

thanks.

Posted on Oct 16, 2008

  • 1 Answer

SOURCE: hi there i have a

My 1987 pulsar with a CA16DE DOHC looses fuel pressure when it sets over night. I have replaced the fuel pump and the external return valve on the tank. the injector seals at the intake are in good condition. The injectors are the ones with the hose that is crimped at both end. Any idea why it loosed pressure and seems like it is out of gas at first start up. It starts good after that.

Posted on Oct 31, 2008

polarcycle
  • 1392 Answers

SOURCE: I have a chrysler 2002 town and country van. The problem is

Have you had the fuel injection and throttle body cleaned yet? Sounds like a bad IAC motor, or dirty injectors. What motor is in it? Did you use the factory plugs and wires? If not, that is the first thing you need to do.

Posted on Jun 10, 2009

  • 290 Answers

SOURCE: uk 99 model subaru impreza turbo

sounds like you have a problem. alot of times the coolant temp switch will cause the idle to go up and down. asfar as the speedo, I believe it works off a switch instad of the cable. this I would take to dealer. missing speed sensor is not good. have it checked at dealer.

Posted on Aug 30, 2009

  • 366 Answers

SOURCE: Conversion kgf.m to foot pounds.

1 kilogram meter = 7.233 013 831 6 pound foot

you can use a online converter like the http://www.onlineconversion.com/torque.htm

3.5 kilogram meter = 25.315 548 411 pound foot
4.5 kilogram meter = 32.548 562 242 pound foot

Posted on Jan 28, 2010

Testimonial: "Thanks,very help full + on line converter info grate. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Daewoo lanos crank


Please do the following.
- (Reset memory) Remove the negative battery terminal for 30 Seconds, reconnect and start the engine. If problem persists,
- Check the resistances of high tension cords (DMM Range = 100 K, Resistance - 10 K Ohms- 30 K Ohms).
- Check the distributor cap, rotor for any crack or corrosion, and module.
- TP position sensor, and MAP sensor.
- Check vacuum hoses and intake manifold for air leakage.
- Check Idle air control valve.
- Check spark plugs gaps.

Feb 27, 2014 | Cars & Trucks

1 Answer

Spark plug gap for fiat pounto 2001 bosch fr d


Check all these are NGK as used by Ffiat

PUNTO 1 (94-->10/99) 1.2 176A7/A8/B1/B4.000 / 8 VALVE 60-75bhp 03/94 -> 10/99 BCPR6E 1269 0.9mm


PUNTO 1 (94-->10/99) 1.2 176B9.000 / 16 VALVE 97 -> 10/99 DCPR8E 4179 0.9mm

PUNTO 2 (10/99-->06/03) 1.2 188A4.000 / 8 VALVE 60bhp 10/99 -> 06/03 BKR5EZ 7642 0.8mm


PUNTO 2 (10/99-->06/03) 1.2 188A5.000 / 16 VALVE 85bhp 10/99 -> 06/03 DCPR8E-N 5692 0.9mm


FIAT PUNTO 3 (07/03-->12/05) SPARK PLUGS 1.4 16v DCPR7E-N-10



Check HERE some accross reference.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 03, 2012 | Buick LeSabre Cars & Trucks

1 Answer

My 99 blazer s10 wit 4.3 engine at idle lopes or skips changed injectors,fuel pump,tps sensor thermostat,egr is workin,tuned up plugs wires cap rotor,fuel ,air filter, had inte man resealed,brougt it to 2...


replace the electric part of the ignition down on the steering colum ....u will have to drop the steering colum down but not totaly remove...fixed 2 s-10 trucks same year that way

Nov 26, 2010 | 1999 Chevrolet Blazer

2 Answers

How do you change spark plugs on a toyota yaris 2001


First you must remove the plastic cover from on top of the engine to access the ignition coils. The next step is to remove the ignition coils. To do this you must carefully disconnect the plug by holding down the plastic tab while pulling the plug off the coil. Then you must remove the small bolts holding the coils to the valve cover. Pull the coils straight out. To remove the spark plugs you will need a torque wrench, long extension and a self holding spark plug socket. All these can be bought at your local auto parts store. The spark plugs are removed by unscrewing them from the cylinder head and pulling them straight out. Installation is the reverse of removal. The spark plugs are tightened to 25 foot pounds of torque and the small bolts for the ignition coils are tightened to 10 foot pounds of torque.

Oct 23, 2009 | 2007 Toyota Yaris

2 Answers

What is the tension on cylinder head bolts for a jeep grand cherokee 307935 4 litre, 6 cylinder, 1999, petrol motor.


Coat threads of left hand front bolt with sealant: 1st - step; - 22 ft./lbs. 2nd - step; - 45 ft./lbs. 3rd - step, all bolts except L.H. front bolt; - 110 ft./lbs. 4th - step, L.H. front bolt; - 100 ft./lbs. fig100.png

Sep 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Uk 99 model subaru impreza turbo


sounds like you have a problem. alot of times the coolant temp switch will cause the idle to go up and down. asfar as the speedo, I believe it works off a switch instad of the cable. this I would take to dealer. missing speed sensor is not good. have it checked at dealer.

Aug 30, 2009 | 1999 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...