Question about Cars & Trucks

Open Question

How do I change my last order shoe size from 8/0 to 11?

Order # 1000-03158-20196

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replaced brake shoes and hardware on 2002 Tribute. Cannot get drum to seat evenly back into groove on backing plate. Bottom side sits flush, but top edge over cylinder will not. Any thoughts?


make sure the shoes are the same size as the old ones, make sure the brake cylinders are the same length as the old ones, make sure any brake shoe adjusters are free to turn and set to zero, make sure any hand brake cables are free to slide in their outer housing, and any adjustment is returned to zero,the drum should then fit providing the linings are not over size.

Mar 03, 2016 | Seat Cars & Trucks

1 Answer

Changed brake shoes and still no brakes


There are a few possibilities for why this is.

1. Wrong size shoes.
2. Excessively worn drum.
3. Didn't adjust self-adjuster wheel out far enough.

People often make the third error since most who change their own brake shoes do not have the drums resurfaced. As a result, there is a ridge on the outer edge of the drum that doesn't get removed. In order to get the drum over the shoes, the shoes must be under-adjusted to allow for the ridge. Then, once the drum is on the shoes aren't tight enough. You can adjust some cars thru a slot in the rear plate behind the drum, but not all.

Feb 14, 2016 | Cars & Trucks

1 Answer

How will I know when to replace the rear drum shoes? How thin should the shoes be, in order for me to change it?


Your shoes and pads have a tab on them that will begin to squeek previous to the brakes going bad. If you've already heard that squeek and now it's gone, that means the tab has worn off and it's really time for service. I don't know the measurements, but a good service shop will tell you which ones are bad.

Mar 13, 2015 | Cars & Trucks

2 Answers

Hi need help pls I cant slide my drum brake cover over my newly changed shoes in my 98 ford festiva


THIS IS BECAUSE THE PISTONS IN THE CALIPER HAVEN'T BEN PUSHED ALL THE WAY BACK IN,.WITH THE NEW SHOES THIS MUST BE DONE IN ORDER TO REASSEMBLE.

Feb 22, 2015 | Ford Cars & Trucks

1 Answer

Dodge ram 1500 year 2004 i changed spark plugs and now it won't crank


Won't crank or won't start? If all you did was change the plugs, chances are the plug wires got crossed up. You didn't state the size of your engine. On the 5.2 and 5.9 engine the firing order is 1-8-4-3-6-5-7-2. If this is not your engine size. Just google the firing order for your engine size.

Mar 30, 2014 | Cars & Trucks

1 Answer

I mixed up my spark plug wires i changed the distributor cap and rotor and spark plug wires but i mixed them up can any one help me


You can google the engine size and "firing order" to get a drawing or photo of the firing order online.
Example - - 1990 GMC 350 firing order diagram

Dec 19, 2012 | GMC Sierra Cars & Trucks

1 Answer

Emergency brakes will not hold car


Your parking brake cables could be stretched and need adjusting. There is generally a way to do this either by an adjuster on the cables under the car or by pulling the console out and making an adjustment inside the car on the bottom of the lever. This is simply taking the slack out of the cable. If the adjuster is under the car be prepared to go buy another unit at a parts store as it will be too corroded to work with.

Your parking brake cables could be corroded and dragging where they enter the brake drum. This is common and may require new cables or at least a good cleaning. Want to do this along with a change in the brake shoes or pads.

Lastly the brake surface itself could be worn beyond service. So new shoes or pads could be in order. If the rear brakes are pads/discs, often there is a special smaller brake or a mechanical as opposed to a hydraulic activation.

Sep 30, 2010 | 1997 Mazda Protege

2 Answers

Change spark plugs and wires not truck wont start. could firing order be wrong!


You could have mixed up the order of the spark plug cables causing the firing order to be wrong. What is the exact year, make, model, and engine size of your truck?

May 31, 2010 | GMC Suburban Cars & Trucks

2 Answers

Cant get my rear brake drum back on my cavalier 2002


Sounds like the brakes are adjusted out too far or the emergency brake is on..

Oct 05, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

Rear brakes scrubbing on 1998 chevy venture van


Removal Procedure Tools RequiredJ 38400
Caution: Keep fingers away from rear brake shoe springs to prevent fingers from being pinched between spring and shoe web or spring and backing plate.
  1. Remove the brake drum. Refer to Brake Drum Replacement

  2. 142285.gif
    tif.gif
    Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
  3. Use the J 38400 in order remove the adjuster spring (1). Disengage the adjuster spring loop from the tab on the adjuster actuator.
  4. 2.1. Remove the loop end of the adjuster spring from the adjuster actuator. 2.2. Remove the straight end of the adjuster spring from the secondary brake shoe.
    142293.gif
    tif.gif
  5. Use the J 38400 in order to spread the brake shoes apart.
  6. Remove the adjuster.
Installation Procedure

    142293.gif
    tif.gif
  1. Use the J 38400 in order to spread the brake shoes apart.

  2. 178990.gif
    tif.gif
    Important: Ensure that the adjuster (2) engages the brake shoes (4 and 5), the park brake actuator (3), and the adjuster actuator (1) properly.
  3. Install the adjuster.

  4. 142285.gif
    tif.gif
    Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
  5. Install the adjuster spring (1).
  6. 3.1. Install the straight end of the adjuster spring into the secondary brake shoe. 3.2. Install the loop end of the adjuster spring to the adjuster actuator.
  7. Install the brake drum.

Dec 06, 2008 | 1999 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...