Question about 2001 Ford Crown Victoria

1 Answer

<!-- from fixya rte -->How do i remove the fuel door button - 2001 Ford Crown Victoria

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

I take it your talking about the one on your driver door panel ; you will need to take off your door panel to get access to it after you have taken out the screws that hold panel in place you need to lift panel (carefully) up towards the top of window and outwards at same time ; then unplug button and should have to tabs to push toward button base and push up through hole of door panel hope it helps installation is opposite of taking apart

Posted on Nov 21, 2014

Testimonial: "thank you for ansering now i know"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to open 2008 Porsche Cayenne gas tank


If you mean the fuel door... if it is not unlocking make sure the key is on and pull the fuel door button on the driver's side door. Button should be next to the rear hatch button. If it is not releasing check your fuses. If you need fast access remove the carpeted side panel inside of the rear hatch and you will find an emergency release.

Jan 24, 2017 | 2008 Porsche Cayenne

1 Answer

1995 grand marquis fuel door button not working


when the small spring that flips the fuel door open when the button/ lever is pressed/pulled ,it gives the impression that the control is not working. Check out the problem by having someone operate the control while you are listening at the door. If you hear the latch moving then the spring is broken/missing. You may be able to get to the latch by removing the boot trim and moving the latch enough to open the door.

Feb 03, 2015 | Cars & Trucks

1 Answer

Can't find fuel lid button


Does not have a fuel lid button. If it will not open it is usually the lock solenoid is not working. You need to remove the interior panel inside the car behind the fuel filler. You will see a solenoid that you can unbolt and remove to open the door. The solenoid will need to be tested.

Apr 19, 2014 | 1994 Volvo 850

1 Answer

My gas door wont open when I hit the button on my 95 cadillac deville.


Some cars will have an emergency fuel door release in the trunk it will be on the side of your fuel door

Could be that somebody tried to pry open and damaged the door removing your fuel

May 16, 2012 | 1995 Cadillac DeVille

1 Answer

Fuel door will not open by pressing the button


I had the same problem. I fixed it by removing the fuel filler door switch and cleaning/sanding the contacts. You don't have to remove the door panel, just remove the 4 screws on the door panel, reach up and pinch the sides of the switch and push it out. Use a small screwdriver to pry off the black piece holding the contacts (you might want to wear gloves) in place. Remove the contacts and sand them lightly. Very easy to do and completely solved my problem.

Mar 30, 2012 | 2008 Hyundai Sonata

1 Answer

Rec'd a new replacement key to my Z3. Was told the activation process was: turn key to position 2, remove key, hold unlock button, press lock button 3 times. It does not work and the Dealer wants me to...


you are doing it right the key should be in ignition at position 2 for about 5 seconds no more than 10 removed hold unlock slowly press unlock 3 times if a door lock actuator or even the fuel door lock actuator is malfunctioning it will not work check these with driver door lock cylinder (fuel door lock does not function with central locking button) all doors should be in same locking position to perform this proceedure first try locked then unlocked hope ive been a help

May 13, 2011 | BMW Z3 Cars & Trucks

1 Answer

Where is the fuel pump reset button on a 2002 ford expedition


the reset button of the fuel is located is under the clove compartment near the door trim passenger side.remove the plastic door trim,u see the red push button type switch

Feb 24, 2011 | 2002 Ford Expedition

1 Answer

The fuel door button does not work, but the trunk button does.


there is a cabel in the trunk that you can pull to open door same side as fuel door usly has yellow handel on it say fuel door

Nov 17, 2009 | 1996 Cadillac DeVille

1 Answer

How do I remove the inside door panel of a 2001 Mercury Marquis


Pop out the window buttons part of the armrest and disconnect the wires. Do the same with the trunk and fuel door buttons. Pop out the two little plastic/rubber whatever they are pieces out of the door pull strap and remove those screws. There's another screw on the bottom edge of the door and the outer edge by the reflector. Pop the bezel out from around the door handle and there's another screw. Pull out and up on the door panel. If you don't know your door code now would be a good time to write down that 5-digit number on the lock control box. You might not have to pop out the button panel or trunk/fuel buttons if you can get your hands behind the panel and take the harnesses apart but you a bad dude if u can.

Jan 11, 2009 | 2001 Mercury Grand Marquis

1 Answer

Drivers side door


Pop out the window buttons part of the armrest and disconnect the wires. Do the same with the trunk and fuel door buttons. Pop out the two little plastic/rubber whatever they are pieces out of the door pull strap and remove those screws. There's another screw on the bottom edge of the door and the outer edge by the reflector. Pop the bezel out from around the door handle and there's another screw. Pull out and up on the door panel. If you don't know your door code now would be a good time to write down that 5-digit number on the lock control box. You might not have to pop out the button panel or trunk/fuel buttons if you can get your hands behind the panel and take the harnesses apart but you a bad dude if u can.

Oct 22, 2008 | 2001 Mercury Grand Marquis

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...