Question about Cars & Trucks

1 Answer

I had a 1992 Buick road master that will shift in

I had a 1992 Buick road master that will shift in reverse but will not move what is the problem

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Clutches and /or clutch band worn out. Time for a rebuild. Check the fluid. If it is black and/or smells burnt. rebuild it.

Posted on Nov 16, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 37 Answers

SOURCE: My 2005 buick rainier is stuck in park.

if the car is on a steep incline could prevent it from engaging

Posted on Jun 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 buick lucerne wonr crank key wont turn to off position shifter stuck in park


Define won't crank ? I'am assuming the key will turn to the start position ! When doing so does the starter spin the engine or not ? Trying to define your problem of won't crank . If when you turn the key to start position an the starter spins the engine over but doesn't start an run , this is a cranks no start condition . If nothing happens when you turn the key to start , this is a no crank no start condition . Your vehicle has a safety system , shift interlock , won't let it shift out of park if the brake pedal isn't pressed . Won't let the key turn off either . Electronics involved , locking solenoid's etc.... Floor or column shift ?
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM)/powertrain control module (PCM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage supply circuit of the shift lock control solenoid. The following conditions must be before the BCM will supply voltage to the shift lock control solenoid.
The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will supply voltage to the shift lock solenoid:
• The ignition is in the ON position.
• The ECM/PCM sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
• The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically unlocking the shift lever allowing the driver to move the shift lever out of the PARK position as the solenoid energizes. When the brake pedal is not applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid mechanically locks the shift lever in the PARK position.
During remote start operation, the BCM will de-energize the shift lock control circuit, locking the shift lever in the PARK position.

Plus the reverse lock out !
The reverse lockout system is a safety feature which prevents an inadvertent shift into reverse at speeds above 5 km/h (3 mph). The system consists of the following components:
• The engine control module (ECM)/powertrain control module (PCM)
• The reverse lockout solenoid
With the ignition ON, battery voltage is supplied directly to reverse lockout solenoid. At forward speeds above 5 km/h (3 mph), the ECM/PCM commands the reverse lockout solenoid ON by grounding the control circuit of the solenoid. This energizes the solenoid and mechanically prevents the shift lever from being moved into the REVERSE position. At forward speeds below 5 km/h (3 mph), the ECM/PCM commands the reverse lockout solenoid OFF, de-energizing the solenoid, which allows the shift lever to move into the REVERSE position.

Power Mode Master
This vehicles BCM functions as the power mode master (PMM). The ignition switch is a low current switch with multiple discrete ignition switch signals to the PMM for determination the power mode that will be sent over the serial data circuits to the other modules that need this information, and so the PMM will activate relays and other direct outputs of the PMM as needed. Refer to Power Mode Description and Operation for a complete description of power mode functions.
You have no clue of the electronics in your vehicle , your best bet have it towed to the Buick dealer .

Apr 08, 2017 | 2006 Buick Lucerne

1 Answer

Back up reverse lights not working 92 buick roadmaster


did you check bulbs , check for fuse , check sensor on tranny,
is shift selector moving correctly,

Jul 21, 2014 | 1992 Buick Roadmaster

1 Answer

Locate fuel shut off switch for 92 Buick road master with datagram


Never been on anything but Ford Products

Pretty well known fact

Apr 14, 2014 | 1992 Buick Roadmaster

1 Answer

1992 buick century 3.3 liter fwd. transaxle wont shift from 2nd. to 3rd. acting like it's going into neutral.When fluid and filter were changed the sponge part of filter was detierated and not found in...


you want to flush out the trani most likly is the filter ran through the trani the check balls inthe shift siloniods are clogged with filter now, but if you have low/1 and reverse the other possibility is that you lost a clutch band inthe trani, that would require a new trani.

Aug 20, 2011 | 1992 Buick Century

1 Answer

When I apply the brake pedal the rear brakes donot work. However my front brakes do work fine. On the 1992 Buick Road Master is there a special valve in the master cylinder? no brake fluid is leaking from...


is it drum brakes in the rear or disc?. it could be that it needs to be bleed out or a bad master cylinder/or the wheel cylinders or slides are seized up .if you need any further insistence feel free to ask again thank you .

Jun 15, 2010 | 1992 Buick Roadmaster

1 Answer

Were is the gas sensor located at in a 92 buick road master ???


Define gas sensor. Exhaust Gas-o2 sensor or Throttle Position Sensor

Mar 27, 2010 | 1992 Buick Roadmaster

1 Answer

Where is the fuel filter located for a 92 Buick Road Master GMC 5.7 Lt1


directly underneath the drivers seat, but, outside in the frame rail of the car on clips,its about 4" long by 2" round.

Feb 23, 2010 | 1992 Buick Roadmaster

1 Answer

I shift from park to reverse No problem with Reverse, But i cant drive


Will it move forward in manual low? Try unplugging the plug above the vacuum modulator to lock it in 3rd and see if it moves. Either way the transmission will need rebuilt but at least one of these might get you moving.

May 20, 2009 | 1992 Buick LeSabre

1 Answer

1992 Buick Park Avenue Transmission probs.


if you can place it in any gear and it will not move, first check fluid level and condition of trans fluid, if it smells burnt you may have to replace tranny

Nov 26, 2008 | 1992 Buick Park Avenue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...