Question about 1998 Toyota RAV4
To get home now you will have to tow it! If the key is from another vehicle then it will need to be reprogrammed for you vehicle, the transponder is an immobiliser to cut the ignition and is set for a particular vehicle! Take to a main dealer or specialist who can reprogram keys!
Posted on Nov 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
may sound like a dumb question but you didnt by chance hook up the battery or jumpstart the car with polarity reversed by accident at some point during this process? i would check all the underhood main fuses and interior fuses as well, what is the condition of the battery post clamps? if they are badly corroded be sure to clean them very well and wash them with a baking soda and water solution im thinking one of the cables or smaller wires that hook up at the battery is broken or possibly some freak accident happend and the computers need to be flashed at a dealer. either way i wish you luck please rate -jeff
Posted on Sep 01, 2008
SOURCE: 1998 RAV4 TYRE PRESSURE??
Thomas Heime is wrong, wrong, wrong! That is the max. pressure that the tyre can handle! the proper tyre pressure is written below the latch on the passenger side door. Open the passenger door, look at the label below the latch and there it is.
Posted on Jan 18, 2009
We took out the top dash cover and the bottom one. With an electric drill a whole was made which helped to push the pin and then we could remove the damaged ignition.
Posted on Sep 18, 2009
SOURCE: 1998 rav 4 ecu pinout location
It is the Violet wire with Wht tracer (off of pin 9C) labeled SPD in the main ECM Engine Control Module.
Locate the E6 dark gray ECM 22 pin connector (two rows of 11 pins). The electornic signal you are looking for is on PIN9 be very careful.
Do Not use the ECM 26 pin or 16 pin connectors...just the 22 pin connector.
Posted on Oct 03, 2009
Tips for a great answer:
Apr 05, 2014 | 2002 Toyota RAV4
Nov 25, 2012 | 2006 Toyota RAV4
Sep 07, 2012 | Toyota RAV4 Cars & Trucks
Oct 04, 2011 | 2003 Toyota RAV4
May 23, 2011 | 1998 Toyota RAV4
Apr 15, 2010 | 2003 Toyota RAV4
Feb 13, 2010 | 1998 Toyota RAV4
Aug 08, 2009 | 2008 Toyota RAV4
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: