Question about Cars & Trucks
Check for side wall failure on the tyres . check for belt seperation.
Posted on Nov 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I know this can look like a daunting task. But there is a diagram of the belt path under your hood - it should be right on top of your radiator cover. The only big thing required is to locate the tensioner pulley and adjust it to the "slack" position - most tensioners have a 1/2 inch square hole to be used with a 1/2 inch breaker bar or ratchet for leverage. Good luck...
Posted on May 03, 2009
Take it to a local auto parts store (Autozone, Murray's, Checkers, Napa) have them hook up a scan tool to get the diagnostic codes, write them down and post them here so we can further assist you. There are many reasons that can cause the check engine light to come on.
Posted on Jan 11, 2010
No, it isn't...
-20" breaker bar
-Liquid wrench (or WD-40 if you don't have any)
-Jack and stands
-sockets to fit all of the connections
1. Remove the back seat:
Bottom cushion comes out by pushing it rearwards and lifting, undo the 2 seatbelt bolts and 2 push nuts and remove the back cushion
2. Jack and support the frame of the car
3. Remove the wheels
4. Place a jack under the control arm where the spring connects to it and put a little tension on the spring. (this is so that when you unbolt the strut the control arm won't come crashing down)
5. Remove the air tube by rotating the spring clip 90 degrees and pulling on the tube at the connector.
5. Remove the lower strut bolts. (Exprerience shows me that removing the lower one first will save you lots of agony...)
6. Remove the two strut mounting bolts that are behind the back seat cushion.
7. Compress the strut and remove from the vehicle.
8. Installation is opposite of the removal. Remember to use a new mount if the one you are removing is worn. I recommend Quick-strut 171798. Good Luck!
P.S. Torque Specs are:
Lower Strut bolts- 140 ft/lbs
Upper strut bolts- 30 ft/lbs
Mount to strut bolt - 70ft/lbs
Posted on Feb 01, 2010
Tips for a great answer:
Nov 16, 2014 | Cars & Trucks
Sep 11, 2010 | 1995 Buick LeSabre
Jan 11, 2010 | 1999 Buick LeSabre
May 08, 2009 | 2000 Buick LeSabre
Mar 25, 2009 | 1994 Buick LeSabre
Nov 02, 2008 | 2003 Buick LeSabre
Aug 15, 2008 | 1999 Buick LeSabre
25 people viewed this question
Usually answered in minutes!