Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Let the engine cooldown,then open the bleed screw on on the thermostat house,do not remove just loosen----fill water in the radiator bottle slowly and watch for water coming out of the bleed screw----
sometimes the bleed screw is blocked due to anti-freeze-then take the screw off completely ,clean and replace----always make sure the engine is cool
Posted on Jun 15, 2009
Firstly, ensure you have the required 'mixture' of coolant/water (must have required coolant).
Second, I would recommend you re-test all the cooling system sensors again (make sure they're within specifications), in case a new one is faulty.
Third, ensure the new thermostat was of the correct temp setting (they all differ), so that it opens at the required time. Most cooling systems operate within 90 - 100degC.
Fourth, make sure the radiator (and associated hoses) aren't blocked.
If your temp gauge is reading higher than normal, but NOT in the danger zone...then this can be considered normal (especially if you've replaced with new components) and nothing to be concerned about.
However, if the temp gauge IS in the danger zone....then this suggests the coolant is not flowing through the cooling system properly.
If all above components test ok, then it's possible your water pump may not be pumping enough volume.
Posted on Aug 16, 2009
Testimonial: "I appreciate your help...Maybe I should just relace the water pump, that would be the last thing that I would need to replace."
It could be just air in the system, or it could be the heater matrix just by your feet, fitted central dash, check to see if the two water pipes that go into the car from the engine compartment are hot if there is only one that is then thats your problem, but if they are both cold the problem is more to do with where the water is coming from, please let me know how you get on
Posted on Jan 04, 2010
Testimonial: "Great tips, pointed me in the right direction."
Tips for a great answer:
Sep 24, 2013 | Cars & Trucks
Sep 19, 2010 | 1998 Cadillac DeVille
Aug 05, 2010 | Pontiac Bonneville Cars & Trucks
May 10, 2010 | 1999 Chevrolet Cavalier
Dec 15, 2009 | 1999 Oldsmobile Silhouette
Jul 04, 2009 | 2005 Dodge Ram 1500
Feb 21, 2009 | 1997 Hyundai Elantra
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: