Torque settings for 2007 vw polo 160i Main and big end bearings

SOURCE: I WANT to replace brakes on a 2007 vw polo, do i

You can get away with an allen key, or with an allen key type ratchet. 8mm for South African models.

SOURCE: looking to find out the torque settings for a golf

give these websites a try www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Colin Stickland

• 22516 Answers
• Posted on May 08, 2011

SOURCE: Hi. Could you possibly tell

17mm head just pull them up tight with a rachet normal size and it will be right ,in 40 yrs +of repairing vehicles from scammel to rollers never used a torque wrench

SOURCE: good day, i need to

Hi rita d ,
the answer to your question according to information supplied by auto data ( the bible to us techs) is 60Nm, then a further 90 degrees. You should also use new bolts. Hope this helps,
Doc Scott

SOURCE: Volkswagen golf 1.4 8valve engine(AGY) Big end and main Bearing torque setting

Mains Stage 1-33Nm Stage 2- 65Nm
Big ends 30Nm