Question about Cars & Trucks
Could be module which control fan speed is bad.
Posted on Nov 15, 2014
Assuming all windows stopped working at once, have you checked the Power Window fuse in the power distribution box (fuse box) in your engine compartment? If you look on page 193 of your 2001 F-150's owner's manual, it shows a layout of the fuses in the box, then page 196 references the fuse/relay itself, in fuse location 602. If you need a replacement owner's manual, you can get it for free online at ford: http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/01f12og4e.pdf
Posted on Nov 15, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
abs light on as well? even tho you changed the speed sensor did you clean the contacts really well? i had the same problem i replaced the sensor and nothing.... then found out the contacts were corroded took the sensor back off and cleaned the contacts. works like a charm! try that and let us know if that helps.
Posted on Sep 24, 2008
SOURCE: ford f-150 lariat super crew
yes i had same problem.2002 f150 fX4 lariat supercrew,took it to ford it was throttle body sensor as the guy above me said.cost me $637.00 also number 7 had new spark plug put in!
Posted on Oct 22, 2008
2008 Ford F-150 SuperCrew Cab (without moon roof or rails): How to replace the map light bulbs. First, you'll need a "trim pad remover." It is a tool with a screwdriver handle and the metal part has a 'smooth' forked tongue (see Snap-on Stock#: A177A for picture). Go to the center counsel and "gingerly" work around he counsel and pull down at the same time. The counsil is held in by six snap in tongs. It should remove pretty easily. once down, you'll see where the bulbs are. Unscrew and replace. Now, just line up the tongs and gently bump or hit the pressure points (where the tongs are) and it should snap into place. It should take no more than five minutes, tops.
Posted on Nov 17, 2008
The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.
Posted on Jun 22, 2009
Tips for a great answer:
Jun 13, 2015 | Ford F-150 Cars & Trucks
Jul 12, 2011 | 2001 Ford F150 Styleside SuperCrew
Mar 11, 2011 | 2001 Ford F150 Styleside SuperCrew
Oct 22, 2010 | 2005 Ford F-150
Oct 12, 2010 | 2005 Ford F-150
Sep 10, 2010 | 2001 Ford F150 Styleside SuperCrew
Jul 13, 2010 | Ford F-150 Cars & Trucks
Jan 03, 2010 | 2001 Ford F150 Styleside SuperCrew
Apr 22, 2009 | 2003 Ford F150 Regular Cab
177 people viewed this question
Usually answered in minutes!