Question about Cars & Trucks

Open Question

How do I access the sound tube in urbeats? - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The rear window washer tubing is leaking inside the front passenger sidewall. How do I get access to the tubing to repair it?


The tubing goes through the passenger side inner wheel housing. You can access the inner tubing by dropping the glove box.
1- Unlatch the glove box
2- Reach to the rear and top of glove box and feel for catch tab(the piece that sticks up)
3- With a little force, maneuver the tab to slip by the catch and fold the glove box all the way forward. This will allow you access to the tubing. Have someone activate the rear windshield prayers while you watch with a flash light as to where the leak is taking place.

Jun 26, 2014 | 2005 Mercury Mariner

1 Answer

Appears water is getting into the cab on the front passenger side from a thick foam gasket under the glove box. It looks like the gasket is where tubing comes through the firewall?


It sounds like the a/c drain. It sounds like it is plugged. Clean it out. May have access to the small hose under the truck or in the engine compartment. Or, try removing the blower motor and see if you have hand access'

Oct 15, 2011 | 2004 Ford F150

2 Answers

Oil is getting into a couple of spark plugs tubes. What is the proper way to seal these tubes?


You have to replace the valve cover gasket and seals. The cover has to be removed to access the seals. Not a hard job. Gasket set w/ seals around $25.00

Jul 31, 2011 | 1996 Dodge Intrepid

1 Answer

Water leaking out of overflow from heater core.


If coolant is leaking from the heater core into the interior or through a weep hole out of the car your heater core has sprung a leak.
Most vehicles have easily accessible heater cores, only requiring removal of a panel under the dash or hood to gain access. On the '97 Skylark it's accessible under the dash.
  • Disconnect the negative battery cable.
  • Drain and recycle the engine coolant.
  • Raise and safely support the front of the vehicle.
  • Detach the drain tube, then disconnect the heater hoses from the core tubes.
  • Carefully lower the vehicle.
  • Remove the console if equipped.
  • Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
  • Remove the floor or console outlet ductwork and hoses.
  • Remove the heater core access cover.
  • Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.


To install:
  • Install the heater core, then secure using the clamps/bolts.
  • Fasten the heater core cover.
  • Connect the outlet hoses and ducts.
  • Install the sound insulators, console extensions and/or steering column filler.
  • Raise and safely support the vehicle.
  • Install the drain tube and connect the heater hoses to the core tubes.
  • Carefully lower the vehicle.
  • Connect the negative battery cable.
  • Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.

Feb 28, 2011 | 1997 Buick Skylark

1 Answer

Replace heater core in 1994 pontiac grand am


Removal & Installation


  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
2a4e97b.gif
Unfasten the sound insulator retaining bolts ...

7ed3765.gif
... then remove the sound insulator

  1. On some models it may be necessary to remove the steering column opening filler.
  2. Remove the floor or console outlet ductwork and hoses.
  3. Remove the heater core access cover.
a5f8d39.gif

Remove the heater core access cover

Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.

a5c4734.gif
Unfasten the heater core retaining bolts; most later models are secured with clamps.

b2756d9.gif
Remove the heater core from the vehicle

To install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.

Nov 13, 2009 | 1994 Pontiac Grand Am

2 Answers

My 2002 dodge caravan has a wet front passenger side floor


Do you have A/C on your Caravan?
It may for a blocked A/C drain tube.
Look under the passenger area from under the vehicle for the drain area and clear the tube.......just go as high into the tube as necessary to clear it .....if you go too high you could damage the evaporator in the heater,A/C assembly and....watch out for water coming your way!

Sep 06, 2009 | 2002 Dodge Caravan

2 Answers

When fuel drops below 1/2 tank wont start, sometimes stalls when running. Can fuel pump be losing prime when tank gets lower? When I add fuel then pump accelerator it starts


You may have a problem in your tank....sounds like a faulty pick up tube? maybe screen is dirty and if you have a pinhole in tube, it would act like that.

Jul 16, 2009 | 1995 Nissan Maxima

1 Answer

Need to locate access panel to replace HeaterCore 1990 Buick Skyl


  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
0900c152800a93fc.jpgFig. 1: Unfasten the sound insulator retaining bolts ... 0900c152800a93fd.jpgFig. 2: ... then remove the sound insulator
  1. On some models it may be necessary to remove the steering column opening filler.
  2. Remove the floor or console outlet ductwork and hoses.
  3. Remove the heater core access cover.
0900c152800a93fe.jpgFig. 3: Remove the heater core access cover
  1. Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.
0900c152800a93ff.jpgFig. 4: Unfasten the heater core retaining bolts; most later models are secured with clamps 0900c152800a9400.jpgFig. 5: Remove the heater core from the vehicleTo install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant

Dec 06, 2008 | 1990 Buick Skylark

1 Answer

Replacing a heater core in a 1994 olds. achieva.


  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Raise and safely support the front of the vehicle.
  4. If necessary, remove the rear lateral transaxle strut mount.
  5. Detach the drain tube, then disconnect the heater hoses from the core tubes.
  6. Carefully lower the vehicle.
  7. Remove the console if equipped.
  8. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required.
0900c152800a93fc.jpgFig. 1: Unfasten the sound insulator retaining bolts ... 0900c152800a93fd.jpgFig. 2: ... then remove the sound insulator
  1. On some models it may be necessary to remove the steering column opening filler.
  2. Remove the floor or console outlet ductwork and hoses.
  3. Remove the heater core access cover.
0900c152800a93fe.jpgFig. 3: Remove the heater core access cover
  1. Unfasten the heater core mounting clamps/bolts, then extract the heater core from the vehicle.
0900c152800a93ff.jpgFig. 4: Unfasten the heater core retaining bolts; most later models are secured with clamps 0900c152800a9400.jpgFig. 5: Remove the heater core from the vehicleTo install:
  1. Install the heater core, then secure using the clamps/bolts.
  2. Fasten the heater core cover.
  3. Connect the outlet hoses and ducts.
  4. Install the sound insulators, console extensions and/or steering column filler.
  5. Raise and safely support the vehicle.
  6. Install the drain tube and connect the heater hoses to the core tubes.
  7. If removed, install the rear lateral transaxle strut mount, if removed.
  8. Carefully lower the vehicle.
  9. Connect the negative battery cable.
  10. Fill cooling system and check for leaks. Start the engine and allow to come to normal operating temperature. Recheck for leaks and check coolant level. Add if necessary.6d0c523.jpg182943c.jpg164cdd5.jpg8032c04.jpg18be863.jpg

Oct 21, 2008 | 1994 Oldsmobile Achieva Special Edition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...