Question about Cars & Trucks
PLEASE HELP I NEED ADVICE
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The vehicle should still be under warranty. Either way it is your best bet to take the vehicle to your local dealer. They will be able to diagnose your problem properly. With newer technologies like push button start their are only more issues that can arise. If you need help locating your nearest dealership I would be glad to assist you further. If you have a moment please accept and rate my solution accordingly.
Posted on Oct 09, 2008
I have a 2003 sierra and my remote starter would not work, it would lock and unlock only, checked out this site found the solution, tried it and in two seconds i solved the problem, Just press the lock button and the start button and viola it works again, thanks for all your help , GGGreat site glad i found it John
Posted on Jan 11, 2009
First, try to re-programme the RKE (Remote Keyless Entry) transmitters before searching for anything else. Assure that the batteries in the transmitters are in working condition and replace them if you are not sure. To pro-gramme the transmitters, perform the following:
Open the driver's door and let it be open throughout the programming process. Then, shift the mechanical door lock lever to the LOCK mode, turn the ignition key to the rUN mode. Within a period of twenty seconds, point a transmitter at the receiver dome and push the lock button for a period of five seconds at least. After the receiver has accepted the programming code the driver's door will unlock on its own. The first transmitter has been programmed, in the same extra transmitters up to four may be programmed in the same way, within twenty seconds.
If the alarm does not work properly, you may have a faulty alarm module and may have to be replace and its common problems with and older model. the systems work like a security systems, if you arms your system with the remote you have to disarm it also with the remote in order for the engine to start and run. The logic in the PCM prevents the VTSS engine no-run feature from arming until the engine start; Its one of the security systems jeep has and if you ask for my opinion its junk. hope that help some..
Posted on Jul 26, 2009
Tips for a great answer:
Dec 11, 2016 | 2011 Jeep Wrangler
Jan 22, 2016 | Honda Cars & Trucks
Jan 14, 2016 | Cars & Trucks
Jan 07, 2016 | Cars & Trucks
Nov 14, 2014 | Jeep Cars & Trucks
Jun 07, 2014 | 2003 Jeep Liberty
Jul 13, 2013 | Cars & Trucks
Apr 15, 2013 | 2004 Jeep Wrangler
Sep 21, 2009 | 1999 Jeep Grand Cherokee
72 people viewed this question
Usually answered in minutes!