Question about 2006 Audi A4

1 Answer

Recently changed brake pads and linings.When braking the car gives the irritating screeching sound.Is there way to

Posted by on

1 Answer

The brake work was not done properly & the pads
have to be properly bedded or run in when first installed

Possibly the wrong pads were used as well

Posted on Nov 15, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

autodr
  • 260 Answers

SOURCE: 2001 Audi TT ''brake pad worn'' warning lamp

the brake pad warning lite will come on when one of the sensors at the wheels grounds out against rotor indicating pads are close to replacement.

Posted on Nov 16, 2008

  • 449 Answers

SOURCE: abs light on

They had to disconnect the abs in order to change the pads so it set off the abs light. you can just drive for a while and it might go away or you can disconnect the battery for 10 seconds but be careful the car player might ask for the code in order to play it.

Posted on Dec 18, 2008

  • 77 Answers

SOURCE: abs light keeps coming on audi 80 1995

looks like you have a faulty sensor (ABS) check all conections on hubs you may have disturbed something when you changed your brakes hope this helps

Posted on Jan 26, 2009

  • 1 Answer

SOURCE: Can I replace my Rear Brake Pads? or does a dealer have to?

2004 AUDI A4 SENSOR CAME ON CHANGED FRONT BRAKES LIGHT WON,T GO OFF RESET PANEL STILL WON T GO OFF

Posted on May 03, 2009

  • 57 Answers

SOURCE: How To Change Rear Brake Pads on Audi A6 2006

Remove the tires, Remove the calaper bolts, (small heads on them 12mm or so) Remove calaper, Pads are setting in a holder. Lube new pads with litheum grease and place in holder. (look at old pads, one or both may have small metel tab on one end) If the new pads have the tab, put that pad where the old pad with the tab was. (ie. tab to the inside) Press pistion in with a 'C' clamp. If it won't go in easly, it may screw in. If the parking brake cable is hooked to the calaper, it probly screws in. Use large pliers to screw in calaper piston. Place calaper over pads and install bolts (lube bolts) Rember to pump brakes befor driving . to get a solid peddle.

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 1995 toyota Camry the disc brakes are screeching when I hit them.


hi any kind of screeching noise normally means uve got a metal on metal contact so i wd say u probally need ur pads changing also the rust that forms is totally normal when not used for a while goodluck

Mar 26, 2012 | 1995 Toyota Camry

1 Answer

I recently had the brake pads of my 2007 Kia Picanto replaced because the front brakes were making an irritating metal-to-metal screeching sound. Now, it still makes a sound whenever I step on the brake. ...


If the rotors were not turned when the pads were replaced, then it is true. Also, if the pads are not the correct material for the car )i.e. Metallic, Semi-Metallic) then they will squeak. Also, there is a sensor that may be bent that touches the rotor in order to notify you the pads are getting low, and that may need adjusting (just needs to be bent out a little bit). Check you invoice for the pad repair and make sure the rotors were turned, if not return the car to the location you had the pads replaced and ask why they weren't. Let me know if I can help you any further.

May 24, 2011 | Kia Rio Cars & Trucks

1 Answer

I have a Toyota Ist that i bought 4 months ago. The problem I have is the noise whenever I use the car brakes. I have taken the car severally to different mechanics (at least 5 times!!) and I am at my wits...


Well, when I have a screeching problem, I try to use Wagner Thermoquiet brake pads that have the shim built in, instead of standard ones.

They seem to stop more quietly than other brands.

The technicians that say that there is nothing wrong are probably just measuring the thickness of the brake discs, and the thickness of the brake pads, and maybe look at the surface of the brake discs for glazing, and don't want to replace parts unnecessarily.

So, I would ask them about this problem and see if they can install the Thermoquiet Wagner brake pads to rectify the problem.

ABS has more to do with pulsing 5 to 6 times a second when trying to come to a halt to avoid locking the brakes. I don't think that it is the cause of your screeching sound coming from the front.

Aug 29, 2010 | 2003 Toyota Corolla

3 Answers

Screeching in right rear wheel ,sound stops when breaks applied


its the brake pad wear indicator telling you your pads are in need of replacing

Sep 09, 2009 | 2006 Kia Sedona

2 Answers

Noisey brakes kia sportage


you may have" lifetime" pads that are extra hard or rubber insulators are worn out start there and get back to us screeching is usualy a result of using the wrong lube instead of what came with the break pads

Jun 16, 2009 | 2006 Kia Rio5

2 Answers

LOUD sounds when braking(99 Corolla)


It is dust/rust and it comes from a low quality or a high carbon metalic brake pad or shoe. this problem can be corrected by using the OE manufacturer parts or the use of Ceramic pads/shoes. However don't be fooled by "Ceramic" on a box, it may just contain ceramic particals and not be a true ceramic pad/shoe. In over 16 years in automotive specialty repair I have found the PD line of the Wagner Thermo Quiet pads/shoes to be the best economical fix or the Top of the line Akebono Ceramic line will fix what ailes you.

May 25, 2009 | 2002 Toyota Corolla

1 Answer

Hyundai excel braking squeek when steering.


This is Caused by Worn Brake Pads. Get some new Pads Installed and it will fix this Problem for you. Please Rate my Solution, I need all the Help that I can Get! Thanks!

Jan 30, 2009 | 1994 Hyundai Excel

Not finding what you are looking for?
2006 Audi A4 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14223 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...