Question about 2000 Mercury Mountaineer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
IIRC these are a coil over design. meaning the coil is over the plug. the coil should have one 8mm bolt holding it on the lower intake manifold. remove the coild to get to the spark plugs. look by the fuel injectors, coil should be just next to it or very close. coil usually says motorcraft on it and circle in design.
Posted on Feb 09, 2009
You are correct in your idea about how the plug wires are attached. If you want to duplicate control wiring you would need to obtain the wiring diagram of the brand of ignition system you want to duplicate. (MSD etc. These systems also require a small battery in order for them to operate. Wiring to distributor was far less complex when vertex type magneto distributors sere used as all that was required was a ground wire to shut them down (exactly like your lawnmower works), As far as plumbing, all systems need to meet safety standards set forth by the NHRA but aside from meeting those standards, each engine builder decides where to locate such items as primary and secondary fuel injectors etc. If you go to the NHRA website, you may be able to find a decent photo of someones engine...that may be helpful. Also check the rule book for such items as kill switch location, brake, chute release etc.
Posted on Sep 13, 2009
Testimonial: "Thank you thundergod, useful information, quick response, I will check out those web sites you suggested. Thank you very much!!!! "
Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.
I really hope hepled with this (remember rated this help) Good luck.
Posted on Nov 18, 2009
Try this. If the distributor is in the right way, the clips that hold the cap on should be just a hair off of 12 o'clock and 6 o'clock. #1 is positioned at 1 o'clock, which is at the firewall side of the distributor. The firing order is 1-5-4-2-6-3-7-8and is counterclockwise from #1. The passenger's side is cylinders 1-2-3-4, from the front of the car. The driver's side is 5-6-7-8 from the front. Hope this will help.
Posted on Feb 07, 2010
Tips for a great answer:
Mar 11, 2017 | 2000 Mercury Mountaineer
May 16, 2015 | 1988 Mercury Cougar
May 15, 2014 | 1997 Mercury Mountaineer
Nov 02, 2011 | 2000 Mercury Mountaineer
Jul 08, 2011 | Mercury Mountaineer Cars & Trucks
Mar 05, 2011 | 1997 Mercury Mountaineer
Mar 11, 2010 | 1993 Mercury Sable
Dec 27, 2009 | 2000 Mercury Mountaineer
Apr 09, 2009 | 2000 Dodge Ram 1500 Truck
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: