Question about Chevrolet Cars & Trucks

1 Answer

Do all of these 2.2l ecotec engines have the same crankshaft? In other words are the crankshafts interchangeable? en.wikipedia.org/wiki/GM_Family_II_engine#L61 2002-2005 Chevrolet Cavalier 2004-2

Do all of these 2.2l ecotec engines have the same crankshaft? In other words are the crankshafts interchangeable? en.wikipedia.org/wiki/GM_Family_II_engine#L61 2002-2005 Chevrolet Cavalier 2004-2008 Chevrolet Classic (Malibu) 2005-2006 Chevrolet Cobalt 2006 Chevrolet HHR 2007-2008 Chevrolet HHR 2002-2004 Oldsmobile Alero 2002-2005 Pontiac Grand Am 2002-2005 Pontiac Sunfire 2005-2008 Pontiac G5/Pursuit 2003-2005 Saturn L-Series 2003-2007 Saturn Ion 2002-2007 Saturn VUE 2001-2005 Vauxhall VX220/Opel Speedster

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,585 Answers

Yeah they are. But I wouldn't put a used crankshaft in a vehicle. Way to many variables by doing this. Get a remanned with the bearings.

Posted on Nov 15, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ray190te
  • 61 Answers

SOURCE: Crankshaft sensor location

on the block close to the sump and flywheel on the front side of the engine it may differ on other engines above is for X18XE

Posted on Jan 18, 2009

emissionwiz
  • 74945 Answers

SOURCE: is the 2003 cavalier and 2004 grand am 2.2 ecotec

The 2.2 DOHC L4 engines used in both cars is the same basic engine assmbly, you may however need to switch over certain accessory brakets from the car the engine is going in, other than that they are exactly the same power plant.

Posted on Nov 25, 2010

  • 14036 Answers

SOURCE: Where is the crankshaft position

look on side cylinder block beside starter.you have to remove the starter to remove the crankshaft sensor.

Posted on Apr 17, 2011

  • 7353 Answers

SOURCE: Where is the crankshaft postioner

on left side of the engine (front of the car), just below where the oil filter housing is, above the starter.

Posted on Aug 30, 2011

wildman554
  • 68 Answers

SOURCE: Where is the camshaft and crankshaft sensor on 2001 Pontiac Grand Am GT 3.4 engine

camshaft sensor is going to be the sensor going to the head. and the crankshaft sensor is most likely around the area where the transmission and engine meet. if not then it would be around the area of the crankshaft pulley. the biggest pulley on your car.

Posted on Nov 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing replace chain


the book is only 4 bucks to read
if car is USA car , its there.
posted over 300 times now.
which engine, 2L I-4 or the V6, what engine, the have sizes
and can be gas or diesel.
if you dont know what engine is there, why try to fix it?
odd.
my guess its a XL7 and not XL-7, they are different cars.
you'll see that here. just 4 lousy bucks to read.
https://en.wikipedia.org/wiki/List_of_Isuzu_engines

Jul 28, 2016 | 2007 Suzuki XL-7

1 Answer

I need position of camshafts and gears to set timing, at the moment inlet manifold is blowing out instead of sucking


Internal combustion engine: TIMING MOMENT.

that position is usually referenced on the crankshaft as "TDC" Top Dead Center... DEAD being referenced as that MOMENT when POWER (explosive) should NOT be exerted on the crankshaft.

Great videos are available... and Wikipedia goes over the topic pretty well (see below).

Hope you find this helpful...

Now all you have to do is realize the constant rate of FUEL COMBUSTION and visualize how to reconcile that with incredibly higher RPMs... and you will become aware of the IMPORTANCE of the ignition TIMING ADVANCE curve.

This is precisely how CALCULUS is used to pick that moment of maximum efficiency to define where the highest levels of performance exists...

but it can't tell you about the smell of the nitro-methane... or the deafening chest-crushing roar of the exhaust (awesome).

Trischmann's Paradox: A pipe gives a wise man time to think and a fool something to stick in his mouth.

https://en.wikipedia.org/wiki/Dead_centre_%28engineering%29

Four stroke engine

video 4 cycle engine Bing video

Feb 11, 2016 | Cars & Trucks

1 Answer

Engine 9970014. What year was it manufactured?


List of General Motors factories - Wikipedia, the free ...

https://en.wikipedia.org/wiki/List_of_General_Motors_factories

WikipediaBecame a GM Powertrain facility in 2004. .... Arlington Assembly after the 2013 modelyear; Past production models: Escalade ESV, .... From 1984 as New United Motor Manufacturing Inc. (NUMMI), which assembled GM and Toyota vehicles.Missing: 9970014

GM Production & Manufacturing Plants Guide ' GM Authority

gmauthority.com/blog/gm/gm-manufacturing/
General Motors Manufacturing Plants. ... We've compiled the most comprehensive guide of General Motors manufacturing facilities from all around the world. ... Fairfax Assembly Plant - Fairfax, Kansas, USA.Missing: 9970014

GM Builds 100-Millionth Small-Block Engine - GM Media


Feb 03, 2016 | GMC Cars & Trucks

2 Answers

I have a vehicle question


Use the door key to lock and unlock the drivers door 3 times.

Dec 01, 2015 | 2002 Buick Rendezvous

1 Answer

2.0L D-TEC 14 VOLT (?-ed.). What is firing and coil order?


J20a or J20B engine?neither,
the forenza is a mix of parts. suzuki Deawoo and GM.
not something easy to work with
they used 5 engines.....total. but yours is GM.(kinda )
The US model line features the 2.0 L four-cylinder D-TEC made by General Motors,
It's no Suzuki J engine, at all. with COPS or twin packs.
no j20a twin packs
no J20B COPs (4 coils independant)
it has one GM pack. (key fact there)
there is a trick to make it run guessing 50% chance
1423
or
2314
ALL THAT MATTERS IS which end is #1
if you understand how wasted spark works.

I think GM calls it a L34 engine too
Family II it called
https://en.wikipedia.org/wiki/GM_Family_II_engine#2.0

seems the answer is obscure.... googling all variant names
no answers.
U20SED (L34) full name here....
ok got a win for this.,.. found it on Youtube.

25831722-jkoj0l0jxzbl0maoxltxivb3-5-0_0.jpg

25831722-jkoj0l0jxzbl0maoxltxivb3-5-1.jpg let me know if this runs perfect. so i can up date the other 10 posts here never answered.

Aug 22, 2015 | 2006 Suzuki Forenza

1 Answer

How many torque must be pot on a crankshaft bolt of a 5A engine


The WEB:

Toyota A engine - Wikipedia, the free encyclopedia

https://en.wikipedia.org/wiki/Toyota_A_engine
WikipediaThe 3A engine is the successor of Toyota's first A engine, the 1A. .... Note: power andtorque specs for North America and Europe are from the 1988-1992 Corollas. ..... A smaller 1.5 L (1498 cc) 5A-F was produced in 1987 and the fuel injected ...

Jul 25, 2015 | 1998 Toyota Corolla Sedan

1 Answer

What is the valve clearance on isuzu 4fd1 engine


lash on 2004
USA car>? no country stated,
why is your Rodeo engine not listed in the WIKI.?

http://en.wikipedia.org/wiki/Isuzu_Wizard

i google
4fd1 i see 4fB1 and 4fC1 but no 4FD1.?

yours missed this list too.
http://en.wikipedia.org/wiki/List_of_Isuzu_engines

if real add it. to the list.

Google returns lots of others using wrong ENGINE ID.
so i guess bingo that?

Jul 13, 2014 | 2004 Isuzu Rodeo

1 Answer

I cant find the crank shaft position sensor circuit A on my vauxhall\opel zafira 02 any ideas?


why are you looking? context, tells that and so we can know job, at hand or what service, is being done. (context)
im curious, or?
ideas' its in the FSM. covers all engines used in that car.
you never posted what engine.!
to fix car engines, you must first know what is there.

1.6 L Family 1 I4 (petrol)
1.8 L Family 1 I4 (petrol)[3]
2.0 L Family II turbo I4 (petrol)
2.2 L Family II I4 (petrol)
2.0 L X20DTL I4 (diesel)
2.2 L Y22DTR I4 (diesel)
on most cars the VIN tells you that
or the chassis serial and ID PLATE.
or just look at it. if not diesel then the displacement in this case
discloses what engine it is.
the other shoe drops:.....
does car run,?
does it misfire.
are the OBD2 Scan does, for CKP?
there are X engines, and L engines. (gm)
go here.
http://en.wikipedia.org/wiki/Opel_Zafira
click YOUR engine and land on wiki page for your engine
and bingo the full letter name(code) for your engine.
eg: click 2.0
and find its a L61 engine. GM

or post VIN, or body tag. it has the engine codes , post them.
one of the most hard cars in earth to track engines used, reads like bad dream..

Jul 04, 2014 | Cars & Trucks

2 Answers

Suzuki xl7 2007 when you wiggle key in ignition check engine comes on with code p0008


great answer
my guess, op simple turns key to on, and is not really wiggling it.
just doing the normal thing. to start car.
then fails to ask a real question, just a statement in fact.
what does it mean.
what do i do (get car serviced as the opr. guide states)
what tests to do, if DIY savvy, RTM?
just 4 bucks to read it .
https://suzukipitstopplus.com/Products/10182-2007-xl7-service-manual.aspx

what is a good guess? (my guess is loose cam drive.)
all my guesses are useless..... car unseen or inspected.
3.6L V6. GM LY7 engine
https://en.wikipedia.org/wiki/GM_High_Feature_engine#LY7
Suzuki calls this the N36A engine.
with VVT cam drive
if the chain gets loose it can fail. this.
and lost more....
get it serviced?
or the tensioner is bad.? (wild useless guess 2)
x marks the spot?
24619398-xalgvmd0rrdo23whpinqegwp-3-0.jpg

Jun 12, 2014 | 2007 Suzuki XL7 AWD

3 Answers

Where is the crankshaft located on car


You cannot see the crankshaft because it is inside the engine. You can see the front end of it on the outside ... it attaches to the lowest pulley on the front that drives the serpentine belt. When the belt is removed it is the only pulley that will turn when cranking the engine.

Sep 07, 2009 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...