Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Before you turn out the light you should have a code read carried out just to make sure nothing sinister is going on with the management system.
If the car is running ok then the code will probably either pertian to the O2 sensor, the EVAP system, or a drop in catalytic efficiency, but this isn't set in stone, just the most popular scenarios.
Very best regards
Posted on Jun 13, 2008
Not a guarantee but try the kiatechinfo.com in the below information:
Kiatechinfo.com will get you all the information you need when working on a kia 2nd only to a chiltons or haynes manual.
For kiatechinfo.com register (its free) then select the information for your car make model engine. Then either do a search for timing belt or pick from proper items in cloumn to the left.
Posted on Jan 19, 2009
SOURCE: i like to now how
P0446 - Vent Control of the Evap System. This Evaporative Emissions System is very complicated. These particular DTCs (Diagnostic Trouble Codes) can be caused by MORE than they tell you. Three MAJOR components in the system can cause this P0446. 1. Charcoal Canister, 2. Charcoal Canister Filter, 3. Canister Close Valve, 4. Fuel Tank Pressure Sensor, 5. Purge Control Solenoid Valve, 6, Wiring and/or connector/connections between them and the ECU. If you wish to trust the computer's diagnostics, then replace the canister close valve (after you have inspected the Evap Charcoal Canister's air filter and find no problems with restrictions of air flow). If the problem comes back, check the Purge Control Solenoid Valve and the operation of the Fuel Tank Pressure sensor - either one of those components, if malfunctioning, can cause a P0446.
Posted on Jun 20, 2009
The thing is your doing the timing belt the water pump is right their with it . it should cost you much more at all besides the cost of the water pump. When doing a timing belt I have a rule that I go by The timing belt/seals =cam , crank , any pulley & tensioner & water pump all get replaced at the same time. I did a t-belt on a Audi A-8 very complex whole front of car has to come off as well, he didnt want to do w-pump & thermostat his thermostat was their as well not even a month later the water pump gave out he had to pay double the price because he didnt want to do it when I had it apart the first time. And make sure mechanic is ase certified . good luck
Posted on Jul 02, 2009
SOURCE: 2001 Kia Optima
P1529 and P0720 does not seem to be understood.
P0715 means Input/Turbine Speed Sensor Circuit Malfunction.
P0118 means Engine Coolant Temperature Circuit High Input.
For more understanding visit:- http://www.troublecodes.net/Kia/
Posted on Aug 08, 2009
Tips for a great answer:
Feb 16, 2015 | 2005 Kia Optima LX
Dec 30, 2014 | 2003 Kia Optima
Nov 14, 2012 | 2008 Kia Optima
Jan 18, 2010 | 2005 Kia Optima
Dec 29, 2009 | 2004 Kia Optima
Sep 16, 2009 | 2008 Kia Optima
Jun 13, 2008 | 2006 Kia Amanti
56 people viewed this question
Usually answered in minutes!