Question about Cars & Trucks
While the TPS fault will read p0122 the accelerator pedal position(APP) also has a say in the code p0122. It can be low input, or circuit malfunction ==the causes-- can be wiring short to ground--TP/APP sensor--wiring circuit open, short to ground/short to positive
Posted on Nov 14, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 15, 2017 | Kia Cars & Trucks
Oct 03, 2016 | 2005 Kia Amanti
Mar 30, 2015 | 2002 Kia Sportage
Mar 31, 2013 | 2004 Jeep Grand Cherokee
Mar 15, 2013 | 2001 Chrysler Town & Country
TPS not mounted securely.
TPS circuit short to ground or another wire.
Damaged computer (PCM).
to fix this code you can try this:
Carefully check the throttle position sensor (TPS), wiring connector, and wiring for breaks, etc. Repair or replace as necessary
Check the voltage at the TPS (refer to a service manual for your vehicle for specific information). If the voltage is too low that is indicative of a problem. Replace if necessary.
If recently replaced the TPS may need to be adjusted. On some vehicles the installation instructions call for the TPS to be properly aligned or adjusted, consult a repair manual for specifics.
If there are no symptoms at all, the problem may be intermittent and clearing the code may resolve the issue temporarily. If this is the case then you should definitely check the wiring to be sure it's not rubbing on anything, grounding, etc. The code may come back.
Aug 02, 2011 | 2005 Kia Sedona
Mar 29, 2010 | 2005 Kia Sedona
70 people viewed this question
Usually answered in minutes!