Question about 2003 Mazda Mazda6

Open Question

I want to start my mazda 6 2003 model without an ignition barrel just the wise wise

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mazda 6 20004 model sometimes turns over but won't start leave it a while then it starts, not sure what is going on?


This sort of a problem requires lots of testing electrically and fuel wise mechanically that includes fuel pump ignition module relay and so on lots of possibilities could generate this symptom Good Luck

Nov 17, 2016 | 2004 Mazda 6

1 Answer

I have a mazda 323 1994. i put a ignition in it but now the key wont turn. ?????


If you put a new ignition switch in it is possible that the pins in the barrel are sticking and are not moving as they should.. take the key out and put powered graphite in the key hole and move the key in and out a few times and that lubricates the pins.. If it still will not turn then best check that the key is correct for the barrel .

Oct 01, 2013 | 1994 Mazda 323

1 Answer

2005 mazda rx-8 won't start


you may need a new ignition barrel

Aug 07, 2012 | 2004 Mazda RX-8

1 Answer

Hi, I have a suzuki swift 2000 model, the key has snapped in the ignition, i have a used replacement ignition barrel and key. When fitted the engine turns over but won't start. I'm guessing th


This car has a chip key, you can't just put any old key in it it must be programmed to not turn on the security system and disable starting, which is what you have now, the system has locked you out.

Feb 10, 2012 | Suzuki Swift Cars & Trucks

1 Answer

There seems to be a metal pin in the ignition that is not allowing the key to be inserted.


sounds like your ignition barrel is warn out .the corrigations on your key pushup small metal pins called tumbelrs when warn thay can fall out -or be pushed out by the verry small springs behind them.as a rule you cant fix it .you need to get a new ignition barrel.

Apr 02, 2011 | 1995 Mazda 626

1 Answer

Trying to change the ignition barrel in a 1994 mazda protege and don't know how to remove the old one from steering column


if you have the old key then push in the kye and turn it to the first click look at the lock and there should be a small hole were you can push in a small pin this should enable you to pull out the hole barrel key as well

Mar 07, 2010 | 1994 Mazda Protege

1 Answer

It has no power. there is no ch. engine light. the cat converters appear to be o k. ignition wise its seems fine. not a gas problem. what else could it be?


There is no way to know without testing things.
Seems ok on the outside but could be clogged on the inside out.
Gas ssems fine but what is the fuel pump pressue ?,
Ignition seems fine but what is the KV output. It could be weak.

Jan 29, 2010 | 2002 Mazda Tribute

3 Answers

How to remove ignition lock cylinder without the key


How to remone 1998 windstar GL (3.8 L) Ignition Locl.

Oct 06, 2009 | 1998 Ford Windstar

1 Answer

Want to remove the ignition lock cylinder since a broken key is stuck inside.


get a phillipshead un do about 4 screws from underneath plastic cover which hides steering colume. remove cover you will see white plug on the left hand side of ignition barrel disconect.then right hand side there will be acable disconect.now get a small chissel and anti clockwise tap bolts which have no heads on them that are on top of steering colume when they are alittle bit lose use plyers its easier pull bolts out clamp will then come of and then you can pull whole ignition of. now there is 2 brass pins which hold barrel in ignition up near the key end remove and barrel will come out but it might be easier to take whole ignition to locksmith and get them to do it and get new key for around 30 bucks i did a mates about couple months ago seeya orangepeel.

May 18, 2009 | 1995 Mazda 626

1 Answer

Ignition


if you get a very strong magnet you may be able to get out without trouble.

Jan 16, 2009 | 1993 Mazda MX-5

Not finding what you are looking for?
2003 Mazda Mazda6 Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...