Question about Cars & Trucks

1 Answer

Ford v-10 has no power. Cranks easily, runs smooth, but no power.

Posted by on

Ad

1 Answer

Look at scan tool data

DO NOT remove the battery cables,before or after
any repairs or you loose ALL your data or clear codes
to see if they will come back,at least write them down, if you do

You need professional tools to see how it's doing

Could be a failing battery
Lots of bad ignition coils
Blocked exhaust converter

Have to look at fuel trim,O2 Sensor data,cylinder misfire
counts & all 8 Emission Monitors & check for codes

Posted on Nov 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Last time truck ran it was very rough at first but in a few moments smoothed out.Turned truck off at home hasn't started since.I'm pretty sure lost power to fuel system.


Try checking if fuel shutoff switch is tripped. U didn't specify if engine cranks, if it does, and fuel switch is okay, then bench test the coil pack.HankK

Feb 01, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

Rough running, no power, smooth running in neutral above 1500rpm, multiple misses below 1500 rpm


Hi, have Ford or Lincoln or Jaguar technician check C.O.P (Coils on Plugs). Now the 2003, 2004 and 2005 models have extended factory coverage to 10 years / 100,000 miles. Information is covered in a Customer satisfaction Program -07M07 from July 2007 that covered the 2003 year. A updae to this Program 07M07, Supplement #1 dated May, 2008 extended the coverage to include the 2004 and 2005 models. The 2003 coverage is for coils and gaskets.

Nov 03, 2010 | 2003 Ford Thunderbird

1 Answer

Hi; My name is Dean Ford. I drive a 1996 Ford Ranger. My belt broke the other day. It runs all P/S A/C . It is an all in one belt. I have been trying to find the diagram. But the one that came up is the...


Actually, you don't need a diagram to replace the broken belt.

All serpentine belt pulleys are either smooth or grooved.
All serpentine belts have a smooth or grooved side.

Just thread the new belt loosely onto the smooth belt to smooth pulleys, and grooved belt side to grooved pulleys, until the last pulley is encountered, which is the tensioner pulley.

Use a breaker bar to move the tensioner pulley to a position where the belt can be easily slipped on, and you're done.

Aug 11, 2010 | Ford Ranger Cars & Trucks

2 Answers

We think it is the diesel injection pump but not sure


Sounds like not all the glow plugs are working.It should run fairly smooth on a cold start if all of the glow plugs are working..Also you shouldn't drive off on a cold start with a diesel,Its really hard on the motors..At least give them 10 to 15 min on a cold start..The oil in them is a really thick oil and when there drove on a cold start theres no oil lubricating the internal parts and will cause the motor to seize up..You may already no this and dont mean you drive it as soon as you start it i just wanted to let you know..When you get alot of white smoke it could be two things,Theres water in the fuel which will make it not have much power die and smoke..But if it runs fine when its warm theres some bad glow plugs...Hope this helps you and have a great day

Dec 08, 2009 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Second time this month it won't start....cranks and cranks but wont start...10 mins later i try again and starts right up 2002 e-150 ford van 4.6.....47,500 m


have another person help with this.Tapping one at a time on the black relays (located in the power distribution box in the engine compartment while you are cranking the engine. BE CAREFUL of moving engine componets !!!

Oct 01, 2009 | 2003 Ford E150

1 Answer

95 dodge dakota - cranks, runs 4 times, 5th don't wanna run


You will need to check the fuel pressure, if it is on the minimum pressure side or lower then you will need to change the fuel pump.

Jun 20, 2009 | 1994 Dodge Dakota Club Cab

1 Answer

Car cranks but will not cold cranks easily


your battery might not have enough cold cranking amps to get your motor running. consider upgrading to a stronger battery. but first take your current battery to a auto parts store and have a load test done on it.

Mar 20, 2009 | 1995 Hyundai Elantra

1 Answer

Car sometimes will not start


have the fault codes read

Oct 28, 2017 | 2004 Ford Taurus

3 Answers

1991 Explorer fuel pump


so where is the shut off reset for the fuel pump on the 91 explorer? does anyone really know?

Aug 27, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...