Question about 1995 Mercury Sable
See the attached image. It may not be exact but should get you in the ballpark.
Posted on Nov 13, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Crankshaft Position Sensor
the dual crankshaft position sensor is secured in an aluminum mounting bracket and bolted to the left side of the timing chain cover, partially behind the crankshaft balancer, hope this helps get back to me if you need mre help. please rate my fix as i strive to be the best
Posted on Apr 29, 2009
1990 Chevrolet Cavalier 2.2L TBI 4cyl
The Crankshaft Position Sensor is located under hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block.
Fig. 1: View of the CKP sensor-to-crankshaft reluctor relationship
Crankshaft Position (CKP) Sensor
A magnetic crankshaft sensor (Hall Effect switch) is used which is remotely mounted on the opposite side of the engine from the DIS/IC module. The sensor protrudes in to the engine block, within about 0.050 in. (1.27mm) of the crankshaft reluctor.
I really hope help you wuth this (rated this help). have a nice day, good luck.
Posted on Sep 25, 2009
Testimonial: "Awesome. Thanks."
It mounts in the side of the block near the crankshaft,it fits in a hole,going into the engine block.,look on the inside of the engine compartment ,on the firewall side,left of the pulleys,down low.
Posted on Mar 22, 2010
Tips for a great answer:
Apr 02, 2016 | 2003 Ford Ranger
Jan 27, 2016 | Lexus Cars & Trucks
Nov 01, 2015 | Ford Aspire Cars & Trucks
Nov 01, 2015 | Ford Cars & Trucks
Sep 11, 2012 | 1993 Mercury Sable
Fig. Crankshaft Position (CKP) sensor (7)
Ford Taurus 2008-2009
Mercury Sable 2008-2009
The Crankshaft Position (CKP) Sensor is a permanent magnet output coil device that monitors the speed and position of the crankshaft. A reluctor is attached directly to the crankshaft, and is used to generate a constant signal as it passes the CKP sensor magnetic coil. The CKP Sensor utilizes system voltage (12 volts DC), or reference voltage (5 volts DC) to generate a digital output signal to the PCM that is based upon a 0.5 volt AC reference. The alternating magnetic field is used by the sensor output electronics to produce a digital pulse. The CKP sensor returns a digital ON/OFF signal pulse during each revolution of the crankshaft, with a momentary signal interrupt for the top dead center (TDC) position of the #1 cylinder. The Pulse Width Modulation pattern is used by the Powertrain Control Module (PCM) to calculate ignition timing, fuel injector timing, misfire diagnostics, and the tachometer display
Jun 20, 2012 | 2008 Ford Taurus X
Apr 15, 2010 | 2002 Ford Escape
Dec 11, 2009 | 2003 Ford Escape
Sep 15, 2009 | 1995 Mercury Sable
Apr 12, 2009 | 1995 Chevrolet Monte Carlo
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: