Question about Cars & Trucks

1 Answer

How do I adjust a Honeywell motion sensor from a straight beam to a wider spectrum?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,774 Answers

There should be 2 small adjusting screws on the unit. One adjust what you want and the other adjust when the light or sensor works.

Posted on Nov 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My headlights Dont work on my 1989 spectrum but the high beams do what could be wrong


Go to the fuse box and check the low beam fuse and the high low relay

Aug 01, 2014 | Cars & Trucks

1 Answer

Headlamp inclination too high up


There are two adjusting screws on the back of each headlight, as a rough check for the alignment, on flat ground, drive the vehicle right up to a wall, mark the centre of the light on the wall, reverse the car straight back about ten feet. Switch on main beam and the beam should shine straight at the mark you made on the wall. Dip the lights the beam should drop and go left by about two inches (UK). Left hand drive the beam should go to the right and down (US).

Jan 28, 2014 | 2004 BMW Z4

1 Answer

How do I adjust the low beam headlght on a 2006 Sabaru Tribecca B9


I have a similar problem. The adjustment screw adjusts both the high and lof beams. After changing the passenger side low beam, both sides then pointed at the ground. High beams were fine. I adjusted so the low beams are fine but now the high beams point straight up.

In talking with Subaru Service he said there is a "module". He said after changing the bulbs they should point down then auto-adjust back up. That didn't happen. I haven't found anything on such a module. He said it woul be $109 for adjusting the lights OR for the module.

If I find anything more I'll let you know.

Apr 10, 2011 | 2006 Subaru B9 Tribeca

1 Answer

1987 chevy spectrum just got it for son. sat for a year (w/fuel in it). cleaned carb, added treatment, changed fuel filter, plugs. runs good accept when you are at a stand still (stop light, sign, etc.)...


If it's a carbureted system, maybe the idle speed can be adjusted with a screw. Not sure on the Chevy Spectrum.

Is this Chevy Spectrum the carbureted model or the Fuel Injected model?

If carbureted maybe the idle stop solenoid is bad.
This will be located near or on the carburetor throttle cable pulley.

Nov 12, 2010 | 1987 Chevrolet Spectrum

1 Answer

How do you adjust headlights on a 1993 chevy C1500


if you look at the light, there is an adjustment screw at the top of the light that controls the up and down motion , clockwise will raise the beam, and a screw on the side that controls the side to side motion. the best way to center your lights would be to park the vehicle 25 feet away from a verticle wall. be sure to be very square to the wall and on level ground. make a tape line vertically on the wall in very close relation to the center of the vehicle, and another tape line vertically in very close relation to the center of each headlight. now place a tape line horizontally in very close relation to the center of the headlights. start with low beam adjustment. adjust the high intensity zone to 2 inches below the horizontal line and 2 inches to the inside of the vertical line directly in front of the headlight. for high beam adjustment, adjust so that the high intensity zone is centered on the center vertical line and just below the horizontal line. hope this helps

Apr 04, 2010 | 1993 Chevrolet C1500

1 Answer

Trying to adjust head lamp in a 1995 chevy C1500 just had to buy a new lamp assembly


if you look at the light, there is an adjustment screw at the top of the light that controls the up and down motion , clockwise will raise the beam, and a screw on the side that controls the side to side motion. the best way to center your lights would be to park the vehicle 25 feet away from a verticle wall. be sure to be very square to the wall and on level ground. make a tape line vertically on the wall in very close relation to the center of the vehicle, and another tape line vertically in very close relation to the center of each headlight. now place a tape line horizontally in very close relation to the center of the headlights. start with low beam adjustment. adjust the high intensity zone to 2 inches below the horizontal line and 2 inches to the inside of the vertical line directly in front of the headlight. for high beam adjustment, adjust so that the high intensity zone is centered on the center vertical line and just below the horizontal line. hope this helps

Oct 20, 2009 | 1994 Chevrolet C1500

2 Answers

HOW DO I ADJUST HEADLIGHTS -- BEAM TOO LOW.


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 13, 2009 | 1996 Chevrolet Cavalier

2 Answers

Headlights, regular and high beam, are not adjusted properly. Also the high beam sends light straight up in front of the SUV ?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 25, 2009 | 2003 GMC Envoy

1 Answer

Problems with this car


Exhaust had rusted out so I straight piped it, and put a boom tube off a truck on it. That was probably the best thing that I did - it sounds mean. The seats are wearing out. Carburetor needed adjustments.

May 14, 2008 | 1988 Chevrolet Spectrum

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...