Question about Cars & Trucks

1 Answer

Ihave a 2000 Nissan frontier 2wd and it has 3.3 motor,in the morning when its cold it will not go in gear,it has an automatic,but if I put it in d2 it will go in gear. does anyone know what the proble

It has 120k miles on the truck

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Try having the transmission fluid flushed and replaced with high quality tran fluid. If that does not help let the car warmup before you drive it as this condition is also called transmission slipping. This happens due to the truck being in very cold weather. The system freezes and contracts, plus the fuel line fluid begins to leak from the seals resulting in a low line pressure. If the vehicle faces a low line pressure or inadequate fuel supply within the system, the gears would refuse to function correctly and that would cause slipping.

Posted on Nov 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 nissan frontier intermittent starting problem with shift lock


Shift lock is just a safety feature, so you have your foot on the brake, when you put it in gear. It has nothing to do with starting the car. Intermittent starting problems can be a few different things. Ignition switch, park/neutral safety switch, wiring, and corrosion. If it clicks when trying to start, it cold be loose/corroded battery cables or a bad battery.

Feb 19, 2015 | 2004 Nissan Frontier XE

1 Answer

I have a 2000 Nissan frontier crew cab 2wd 3.3 motor with automatic,in the mornings I will warm it up and when I put it in drive I have to wait from 30 to 45 seconds to a minute before it goes in gear


please check fluid level again

use this technique please
DRIVE FOR 15-30 MINUTES TO WARM UP TRANNY
1 find FLAT GROUND
2START ENGINE WITH FOOT ON BRAKE

3 PUT IT INTO DRIV- WAIT15 SECONDS

SHIFT INTO EVERY GEAR AND LEAVE FOR 15 SEC-30 SEC BEFORE NEXT GEAR

RETURN TO PARK

CHECK FLUID LEVEL- ADD AS NEEDED- IT SHOULD NOT SMELL BURNT if this happens in every gear while driving, may be torque converter- take to good tranny shop for inspection- happy trails

Jan 08, 2015 | Nissan Cars & Trucks

1 Answer

Where are the freeze plugs in a 2000 Nissan frontier with a four cylinder engine and automatic transmission?


In the side of the motor, also called welsh plugs there could be one in the back of the head as well.

Dec 17, 2014 | 2000 Nissan Frontier

1 Answer

How do I reset check engine light on a 2000 Nissan


UNPLUG BATTERY FOR 5 MINUTES IF YOU DONT HAVE A TOOL

Oct 21, 2014 | 2000 Nissan Frontier

1 Answer

Starting frontier after manually shifting automatic gear shifter without key?


The shifter lever must be in either neutral or drive. The Frontier has an unlock mechanism to shift the lever if is locked.

Oct 08, 2014 | 2000 Nissan Frontier

2 Answers

What is eng oil capacity for a nissan frontier 4 banger 2000 model


Including filter; the oil capacity for a 2WD, 2000, Nissan, Frontier, 4cyl (Ka24de) is 3-3/4 quarts. Straight out of the Haynes manual.

Nov 28, 2009 | 2000 Nissan Frontier

1 Answer

Transmission is not shifting properly on my 2000 nissan frontier 2wd pick up, auto It revs at 3-4000 rpm instead of a nice consitent 2000rpm, revs real high and doesnt change gears intill 20 mph, it doesnt...


You could have a bad valvebody in your transmission or a bad pump in your transmission or your clutches are bad. In any case you have a bad transmission. Please rate my answer.

Nov 17, 2009 | 2000 Nissan Frontier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...