Question about 2006 Toyota RAV4
Make sure it's full of fluid-if so drain a 1/2 quart & add Lucas trans conditioner made for that model!!-Otherwise it's teardown time-Something that shouldn't be needed before 400k to 800k if you changed fluid regularly & or not let a $10.00 seal leak & run it low on fluid-Good Luck, John T
Posted on Nov 26, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: rav4 gear problem
You need a new 5th gear- luckily this is easy to replace- I did it myself following online directions for 5th gear replacement. The 5th gear is not in the box with the other gears- its off to the side so you can access it very easily by removing the left front wheel. Just don't let the idler assembly come apart, lots of tiny parts and springs...
The 5th gear can ware out prematurely if you rest your hand on the shifter- do not rest your hand on the shifter in the future.
Posted on Feb 18, 2009
Your rattling noise in engine bay ,dose it do it only when you start up, and if so dose the rattle go when the oil light on dash goes out, If yes then its either Low in oil/your parking on a slope/engine bearings worn/oil filter change and change oil to 30/50 oil.
you should only downshift to 1st whan stopped but you can change up and down the g/box without a clutch with correct Revs
Posted on Sep 22, 2009
I am having a multiple cylinder misfire on my 2006 Toyota RAV4 with the 3.5L V6. Every cylinder is reporting a mifire. Each cylinder has it's own coil. I highly doubt that all 6 coils went bad at once. Does anyone have any idea what my be causing this?? Is that the problem you two are having?
Posted on Mar 09, 2010
You need a scanner to pull out the engine light codes.
Use a shopu manual to aid you with the diagnosis and repair.
The slip indicator and vsc light being on means these systems are not working. Once you pull the codes and do the repair and erase the codes the lights will go off.
There will be a code in there for the misfiring.
Good luck and keep me posted.
Posted on Mar 09, 2010
the cabin filter is behind glove box, open glove box an release it so it opens farther to get to filter ( should be release clips at sides of glove box)
Posted on Apr 26, 2010
Tips for a great answer:
Jun 04, 2016 | 2001 Toyota RAV4
May 10, 2016 | Toyota Cars & Trucks
Nov 13, 2014 | 2006 Toyota RAV4
Oct 19, 2014 | 2000 Toyota RAV4
Oct 18, 2012 | 2006 Toyota RAV4
Sep 18, 2010 | 2003 Toyota RAV4
Apr 09, 2010 | 2006 Toyota RAV4
Jan 31, 2015 | 2006 Toyota RAV4
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: