Question about Cars & Trucks

1 Answer

04 dodge status se 2.7 flex fuel, is having problems starting. It will start fine then an hr later it will try to turn over then just start clicking. I can jump it just fine and it will usually start again. It's only happened twice but I wanna fix it before it becomes regular

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,349 Answers

I would have to make sure the battery has a full charge. Also, you may need to check your charging system. When problem is ongoing, I'd have to check circuits at the starter. Any testing for the starter, make sure tranny is in park or neutral and the parking brake is set. I can help you with testing, but, you have to do the tests.

Posted on Nov 12, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: vehicle needs to be jumped to start,battery/alternator fine.

E-mail me back to sign up for my platinum plan and I'll tell you how. I thought this service was free. Sorry to have signed up. Please take me off your list...

Posted on Nov 18, 2008

tommyboinow
  • 324 Answers

SOURCE: Hard to start warm engine

Sounds like you have a problem with your fuel injectors, either they are working to much or not enough once they get warm....

Take it to a shop ant tell them you want the injectors tested.

Posted on Nov 26, 2008

  • 12 Answers

SOURCE: 96 Astro Fuel Pump Question?? no start/Flooding

With the upper plenum removed and spark disabled turn on the key and allow the fuel pump to prime while watching the fuel lines from the back of the intake to the injector. I suspect you lines are leaking. Have seen this before. ALOT.

Posted on Nov 27, 2008

dgjtex
  • 405 Answers

SOURCE: vehicle "clicks" when trying to start...

Clicking is the solenoid, on top of your starter, have someone crank while you tap on it, lots of times this will make it connect and engage. if it works then replace solenoid on starter.

Posted on Dec 27, 2008

  • 66 Answers

SOURCE: 02 saturn l200 starts then dies immediately

try your spare key it sounds like the transponder in the key is going bad

Posted on Jun 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Dodge Status SE, runs for a bit then cuts off. Had a brake light that did not work with headlights on, changed bulb, a day out so later car shutters and dies. Get it started a couple times and manage...


Have the fuel pump pressure checked (sounds like the fuel pump is goiing out). The fuel pressure should be 46-50 psi on the 2.0L & 2.4L engines.
On the 2.0L SOHC engine fuel pressure should be from 44-55 psi.

Jul 29, 2014 | 2000 Dodge Stratus

1 Answer

I have 04 dodge Intrepid and it won't start. I


When you say won't start do you mean it will crank over but not fire off or do you mean it doesn't' turn over at all? We refer to this a "No crank no start" or "Cranks will not start"

Jun 22, 2017 | 2004 Dodge Intrepid

1 Answer

2004 intrepid replaced MAP sensor and cleared codes. about 100 miles later drove to work, 8hrs later started it and engine started intermittently revving at idle and in gear. had to keep heavy on throttle...


TPS wears in spots and can cause intermittent problems like you described. Try turning off the car and unpluging the TPS. Start the car and see if smooths out the idle/reving problem while the TPS is unplugged. If yes replace the TPS.

Aug 12, 2017 | 2004 Dodge Intrepid

1 Answer

04 se 3.3 starter clicks loudly but wont engage


Car no start problem is sometimes very difficult to confirm. You try all the possible things, but still you get no fault and problem is still the same.--------
In that case, you need to check few things individually.
Check the spark,the battery,the crank, the fuel and other most possible parts. Click this link below for more details:-- http://howtobyme.blogspot.com/2011/10/car-troubleshooting-tips.html

Oct 04, 2011 | 2004 Dodge Caravan

1 Answer

1999 Honda CRV Wont Start. It turns over just fine but won't "catch". I put my key in the dash board maintenance schedule whole and it started...worked fine for a week. Now won't start again. ...


I am having the same problem as you wish new what it is.
My wife lost her keys, we tried starting car with the spare key but it winds over but won't start. Found the keys an hr later tried the old keys and it started. Maybe some problem with the keys and the ignition.

Nov 29, 2010 | 1999 Honda CR-V

3 Answers

I have a 2004 Dodge diesel 3500 one ton it quit us about two weeks ago but it was a really cold day we thought the diesel had gel. A few days later is started and today it quit again its not cold today....


check for water in the fuel filters and drain them accordingly also check the fuel heater circuit in the fuel filter hosuing to make sure it is working and not shorted check the glow plug relay to mae sure its functioning correctly also

Jan 22, 2010 | 2004 Dodge Ram 2500

1 Answer

I have this weird issue with my 92 pontiac grand am se. it will start fine wheen i leave home i drive a few miles to the store turn off and when i come back in 1/2 hr or so i try to start it but the engine...


You might have trouble on your fuel pump motor or on security system (passkey-II)

1.If the car wont start, kindly check the fuel pressure it should be 41-47 PSI
2. Also check the telltail messege of security system it should on for 3-5 seconds only after ignition on.

May 18, 2009 | 1992 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...