Question about Nissan 1400

1 Answer

The indicators on my nissan 1400 is not working but if i switch on the hazards all the indicators are working.What can be the cause of the problem.I have already bought a complete new indicator switc

The indicators on my nissan 1400 is not working but if i switch on the hazards all the indicators are working.What can be the cause of the problem.I have already bought a complete new indicator switch.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 603 Answers

I believe this to be the contacts on the inside of your indicator switch. GOOD LUCK FRIEND.

Posted on Nov 13, 2014

Testimonial: "Unfortunately it seems not to be the problem.I also bought a new flasher unit.Does the 1400 only have one flasher unit or is there may be a second one?The one that I replaced is mounted underneath the dashboard."

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: HAZARD LIGHTS ON BUT NOT

HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Posted on Nov 25, 2008

j_del
  • 1586 Answers

SOURCE: Flashing Unit for Indicators Replacement

Most likely it's the hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both fail completely. Replace your hazard switch on the dash and you'll be good to go.

Posted on Aug 31, 2008

  • 651 Answers

SOURCE: Indicators in 1992 Nissan Pulsar

the relays are usually under the hood on either side of the engine.

Posted on Nov 28, 2008

  • 88 Answers

SOURCE: I have a 2002 audi tt, the indicators are not working but the hazard lights are still working

check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse

Posted on May 20, 2009

bunnydawg
  • 5158 Answers

SOURCE: Indicators not flashing on Audi TT

i believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.

Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the emergency flasher relay located on 2013 Rogue?


Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Oct 13, 2014 | 2013 Nissan Rogue

1 Answer

1992 nissan maxima no indicators working


check the fuses first then if they are good then you could have a bad signal flasher that needs to be replaced.do the lights work front and back when trying the signals,if so then it could be the flasher.note that the hazard flasher looks the same as the signal flasher,also do the hazard lights work when operated if so this indicates the signal flasher as well,and eliminates the turn signal switch as the problem.

Sep 01, 2011 | 1992 Nissan Maxima

1 Answer

The blinkers are not working correctly on my 2001 Nissan Xterra. I believe I need to change the blinker fuse. I need some instructions....


hi again thanks for reply from the symptoms you now clearly describe it would seem the flasher unit is faulty ie as it is operating its contact may be o/heating and failing these are not servicable and have to be renewed simple diy ? the point you made that your hazard indicators are also doing same as indicators woul suggest that the actual flasher relay unit is the actual hazard switch this is common on other cars so you need to remove switch/hazard and unplug the socket then fit a replacement you could try other cars /breakers? for same switch and try lights if ok then much cheaper than a new one hope this helps ?

Mar 24, 2010 | 2001 Nissan Xterra

1 Answer

When i turn my indicator on the hazard lights come on? I've checked to make sure all my bulbs work, everything seems fine.


check the turn signal switch. the turn signal switch and the hazard siwtch are the same unit.

Nov 22, 2009 | 2002 Nissan Altima

2 Answers

Turn signal isn't working on my 1992 Nissan pathfinder. Fuse is fine. Hazards are working. It might be the relay, but I don't know where it is located.


you americans and your facination for relays,they rarely go wrong ,if hazards working and flashers do not then their is only two options ,the hazard light switch or the flasher switch ,i would change the hazard light switch first ,they are interconnected

Nov 21, 2009 | 1992 Nissan Pathfinder

1 Answer

Renault kangoo indicators and hazard lights have stopped working, checked the fuses there ok. Could you help?


Most common cause is a failed indicator relay. Just swap it with a known good one to confirm whether it's faulty but ensure it's correctly rated for your Kangoo.

After that, the next most common causes are more expensive: the indicator switch and the hazard light switch.

Nov 01, 2009 | 2000 Renault 181

2 Answers

No hazard lights


Check the hazard switch and the connector to hazard switch see if u have the power and earth to hazard switch if there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem

Jun 16, 2009 | 1997 Mitsubishi Mirage

2 Answers

Indicators do not work Although al lamps light when locking Car


Hazard warning light switch fault.
The hazard light warning button in the middle of your dash is actually a relay that often fails, causing this problem. New switch required.

Jan 12, 2009 | 2000 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...