Question about 2006 Hyundai Santa Fe

1 Answer

How do i remove the top radiator core support on a 2006 hyundai santa fe?

The hyundai book says to remove the 6 bolts and it should come off but i have removed those and it won't come off. what do i need to do to get it off so i can get to the radiator?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Hyundai Master
  • 46,595 Answers

You may need to use a flat bladed lever (screwdriver) to move the bracket up as it will be a neat fit

Posted on Nov 12, 2014


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 61 Answers

SOURCE: how to remove the radiator out of 2001 pontiac aztek

ok, i'm gonna take a stab in the dark- i have never seen teh motor of an Aztek, but you should remove the fan shroud, remove the hoses- top and bottom- remove the screws from the brackets and it should pick strait up.

Posted on Nov 25, 2008

  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

  • 87 Answers

SOURCE: 2002 hyundai santa fe front transmission leak

swap w/rear radiator rear doesn't require fluid.

Posted on Jul 28, 2009

michigan man
  • 3533 Answers

SOURCE: how to change blower motor in a 2003 hyundai santa fe

try these two websites and and you should be able to get pictures and diagrams showing you how to repair your truck

Posted on Aug 02, 2009

  • 10319 Answers

SOURCE: how do i remove the factory radio from my 2006

Try this website to download a free manual

Posted on May 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the knock sensor located on a 2011 2.4 engine hyundai sonata?

On-Line Service Manual is available on the following website:

Hyundai Sonata: Knock Sensor (KS). Repair procedures:

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to "Intake And Exhaust System" in EM group). 3. Disconnect the injector connector (A). 4. Remove the installation bolt (B), and then remove the sensor from the cylinder block. syffl0041n.gif

caution_icon_eng.gif • Install the component with the specified torques. • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing. 1. Installation is reverse of removal. Knock sensor installation bolt: 18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
knock sensor-m3h04eiq4trf45oprzz0vy4e-2-0.jpg

Knock Sensor/Parts are available on the following website:

May 22, 2017 | Hyundai Cars & Trucks

1 Answer

How come after removing all the bolts we are having problems removing the intake manifold on our 6 cylinder 2010 Hyundai Santa fe?

Make sure all the bolts are out of it, then tap it a little, the gasket is probably just stuck.

Jun 05, 2016 | 2010 Hyundai Santa Fe

2 Answers

How do I remove and replace radiator on a 2003 hyundai accent?

first before you change the rad check your thermostat and try to flush your system and check if you got leak aroud the w/pump.

Sep 12, 2014 | 2003 Hyundai Accent

2 Answers

How do i replace the cooling fan in a 2005 hyundai santa fe

Made a video showing how to replace the radiator but in the process I show how to remove and install the cooling fan in the process.

Jul 22, 2014 | 2005 Hyundai Santa Fe

1 Answer

How do I replace a starter on 2010 Hyundai sonata

just like on all cars. , this your first? (step by tiny step)
FSM (book, from Hyundai.)
or generic. (car repair for dummies at Barnes & noble.)
1: remove neg lug of battery first or risk eating ACID,.
2: gain access to the starter,
3: remove the wires there.
4: remove the 2 bolts.
5: it falls out.
reverse above for back in.

Jul 18, 2014 | Cars & Trucks

1 Answer

How do I drain the radiator on a 2004 Hyundai Santa Fe 6 cyl?

Made a video showing how I replaced the radiator on my 2005 Hyundai Santa Fe and in the process show where the drain plug is.

Aug 19, 2013 | Hyundai Cars & Trucks

2 Answers

2001 hyundai santa fe drain for radiator

Made a video showing how to replace the radiator on my 2005 Hyundai Santa Fe and in the process I show where the drain plug is.

Mar 14, 2013 | 2004 Hyundai Santa Fe

2 Answers

Hyundai santa fe starter were is it located

On the 3 different engines (4 cyl & both V6s) on LH side (radiator side) below the exhaust manifold. All have two14mm bolts mounting them to the engine.




Aug 27, 2011 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2006 Hyundai Santa Fe Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides