Question about 2014 Porsche Cayenne

1 Answer

How to remove right rear seat on a 2014 porsche cayenne

Its the second row. how to remove the bottom cushion to get access to the front bolts to take the seat out. Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 26 Answers

I'm not sure what exactly your asking here, as these seats have built in levers on the top left that requires you to pull them forward releasing the catch at the top of the seat. You must pull the bottom of the seat up first, then remove the headrests and place them in the slots located on the bottom part of the seat. This is for convenience of storage for them. If the lever has broken as this is the case with many, you need to get a screwdriver to lift up the catch on the back of the top part of the seat. If you want to remove the seat entirely you'll need to purchase triple square sockets. I think it's a T20. I beleive it's the same size as for the bolts to remove the front seat to gain access to the battery.

Posted on Nov 26, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: HOE TO FOLD DOWN REAR SEATS

1 lift the front of the lower part of the seats, then fold the lower part front
2 remove the headrest and fold upper part front

Posted on Apr 22, 2009

  • 1986 Answers

SOURCE: how to change battery on 2004 porsche cayenne

It's a 10mm triple square socket

Posted on Oct 05, 2009

iambanshee74
  • 3489 Answers

SOURCE: Porsche Cayenne 2003 battery removal Problem -

The spline socket that is used is a 16 point. You may have to get it from Porsche depending on the area you live in. If you are in a big city, you may find it at a local parts store. Either way, Get one and keep it in the car. Look in the trunk first in that little kit, it may be in there in the trunk area near the spare tire. just for info, there are posts in the engine bay, on the driver's side where you can just start the vehicle. There may be one in the trunk area as well that is used to start the engine. Make sure you get the proper battery. If not, it can cause electrical issues that will make you think your car is posessed some how. Let me know if you need anything further.

Posted on Sep 07, 2010

thesynic
  • 23 Answers

SOURCE: how to remove "service now" on my porsche cayenne

You will need a code reader that connects to the cars OBDII system port. With the reader you can read the codes that are causing the light to come on (fix the problems) and clear the codes. The light will go out. I would caution that if you are seeing the "Service NOW" light that you should stop driving the car immediately and have it looked at. There is another message that says "Drive to service location" which is less severe.

Posted on Mar 01, 2011

  • 730 Answers

SOURCE: How to remove parking light bulb on 2004 Porsche cayenne

Try you tube! You tube has it all!

Posted on Aug 12, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the back seat to get to the fuel pump?


On what? 3 possible ways the rear seat cushion is removed. On some the seat has clips that lift straight up. Or some have 2 small bolts at front bottom of rear cushion. Remove the bolts and seat slides out easily. The final way is old style: a heavy wire on bottom of cushion, one on each side, fits into slots that come up from the frame underneath. To remove, push cushion hard to the rear until the heavy wires can be removed (lifted up) from the slots. Do one side at a time. These are the most difficult to remove the rear bottom cushion. You have to push hard against the cushion near the bottom of it, pushing it backwards, so the wire comes out of the slot, and then cushion can be removed.

First try lifting straight up on the cushion. Since there is an access panel to the gas tank, it is very possible the cushion is easily removed by lifting straight up.

Jun 05, 2015 | Seat Cars & Trucks

1 Answer

How do u remove the rear seat on 1196 honda accord?


The rear seat is four (4) pieces.
You will need two tools a 6mm and 8mm wrenches.
1.) Unbuckle the rear seat belts. 2.) Locate the bolt in the center part of the rear seat, between the cushion and the seat-back. Remove the bolt with a 6 mm socket wrench. 3.) Push down firmly on the front edge of the rear seat cushion and pull it toward you to unhook and remove the rear seat cushion. Push the seat belt stalks through the center holes and lift the cushion out of the Accord. 4.) Pull the lever on the side of the rear seat bolster to lower the rear seat-back, which must be in the down position to access its bolts. 5.) Slide the center seat belt toward the passenger side of the vehicle. Move the loop over the edge of the seat-back to prevent it from hindering removal. 6.) Remove the three bolts from the bottom edge of the rear seat-back, using an 8 mm socket wrench. One bolt is in the center; the other two bolts are on either side. 7.) Pull the rear seat-back out of the Accord. The remaining sections of the seat should be the two side bolsters. 8.) Remove the bolts from the bottom of the side bolsters with a 6 mm socket wrench. Push firmly against the first side bolster. Push it upward to slide it out of its mount. Repeat the process on the bolster on the other side to finish removing the Accord's rear seat.

This should take approximately 15-30 minutes depending hoe mechanically inclined a person is.

Sep 17, 2014 | 1996 Honda Accord

1 Answer

How to fold down rear seat on Porsche Cayenne


Remove headrest, there is a small button on the base of the headrest mount you need to push in. Next pull up the strap at the front of the seat cushion bottom, then flip forward. Press in the flipper on the top of the seat back and pull forward.

Sep 06, 2014 | 2009 Porsche Cayenne

1 Answer

He seow do i remove rear seat cushion in 2009 toyota camry


I just replaced my rear struts on my 2009 Camry Hybrid. This was the second time in my life I ever did this kind of work. The trick is to get access to the top of the strut. You have to fold down the back seat cushions. In my hybrid there are two pull levers in the trunk that release the seats. The levers are at the top of the trunk.

Once you fold down the seats, there will be two side cushions on the side of the seats that did not fold down. At the bottom of that side cushion, between the side cushion and the bottom seat is a bolt holding the side cushion on. It is way in the back so you will need an extension with a 12mm socket to get to the bolt. Dont be afraid to dig you had into the space to find the bolt. Once you unscrew the bolt, you can lift up on the side cushion and it will come out (lift upward). You now have a clear (and easy) access to the top of the strut.
11_8_2012_9_36_26_pm.jpg11_8_2012_9_36_48_pm.jpg11_8_2012_9_37_06_pm.jpg

Aug 27, 2012 | 2008 Toyota Camry

1 Answer

How to change the third break light bulb in a 2007 hyundai sonata ?


From 2006 to 2010, the Sonata's 3rd brake lamp requires the rear package deck be removed to access that bulb.
1. Remove the rear passenger seat bottom (remove two12mm bolts between the seat back and the seat bottom - tilt the seat back forward to locate these bolts).
a. Press the two bottom front edge tabs to release the front of the seat bottom from the floor.
b. Remove seat bottom & set aside w/two 12mm bolts
c. Tilt both seat backs downward
2. Remove the left & right hand shoulder cushions (12 mm bolt at the bottom of each cushion)
a. Remove seat belt from shoulder cushion guide at the top of the cushion
b. Lift up and forward on shoulder cushions to remove them (if equipped with side airbags, disconnect wire harness connector).
c. Set shoulder cushions aside w/two 12mm bolts
3. Using a small flathead screwdriver, pop out the 'SRS' button cover from the C pillar panels on the left & right hand side to access either the phillips head screws, 10mm bolts, or #30 Torque Screws
a. Remove screws and set aside
b. Using a standard flathead screwdriver, pop out the C pillar panels on both sides (clips hold these panels in place)
c. Set these panels aside after removal w/screws/bolts
4. Trunk Access-way panels are held in place by phillips head screws (two at the bottom (left and right hand sides) and 4 to 5 at the top .
a. Remove left and right hand panels and set aside w/screws.
5. Rear package deck held in place with two plastic clips (white, yellow or pink)
a. lie on your back inside the trunk (trunk lid open to allow for more light). Looking through access hole find 3rd brake light wire harness connector & disconnect.
b. locate package deck clips, one on the left and another on the right on the underside of the pckage deck
c. Squeeze clips to push them out - package deck will come loose
d. Remove package deck & remove 3rd brake lamp bulb socket (turn counter clockwise to remove). Replace bulb & reassemble in reverse order.

Sep 05, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

I can't into my trunk there is something stuck therefore i need to fold down my rear seats and move it but i don't know how to fold them down I trie but i got nowhere


Be sure that your model has fold down rear seats...you should see the seperation around both rear seats...if equipped, the fold down release is located at the top corner of each rear seat...pull the lever up to release...if your model does not have the fold down option...you will need to remove the rear seat...remove the lower cushions first...look on the lower front of the seats for hold down bolts...second you will need to remove the top of the rear seat...hold down bolts are at the bottom of the top cushion...after removing the bolts (one each side) you need to push up on the cushion to remove...this will then allow access to the trunk...find the trunk latch and try to release by twisting the latch cable...Hope this helps...

Jan 20, 2011 | Pontiac Sunfire Cars & Trucks

1 Answer

Where is the battery located on a porsche cayenne supergirlsharon_622@msn.com


There is an auxiliary battery in the rear on some models. It is used primarily for starting, while the main battery runs the electronics during normal operation.

Main battery is located under driver's seat. You only need to remove the two silver triple-square bolts to "swivel" the seat back. You may have to remove the seat frame trim at the rear to keep from damaging it when the seat is tilted.

Nov 03, 2010 | 2004 Porsche Cayenne

1 Answer

How to remove the back seat from my 1998 Mercury Villager


it is not designed to be removed. It is designed to slide back and forth as needed.

Section 01-10: Seats and Tracks 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Seat, Rear Bench
Removal
  1. Remove the center seat(s) if equipped. Refer to the procedure in this section.
  1. Slide the bench seat forward to the center row seating position.
  1. Use a flat-blade screwdriver to remove the cover caps from the front of the rear seat cushion latch cover.




  1. Remove the two rear seat bolts from the front of the rear seat cushion latch cover.




  1. Lift the rear seat cushion floor cover on the back of the rear bench seat and remove the two inboard rear seat bolts and the two outboard rear seat bolts.




  1. Remove the bench seat from the vehicle through the body side door opening.

Apr 30, 2009 | 1998 Mercury Villager

1 Answer

HOE TO FOLD DOWN REAR SEATS


1 lift the front of the lower part of the seats, then fold the lower part front
2 remove the headrest and fold upper part front

Apr 19, 2009 | 2004 Porsche Cayenne

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

Not finding what you are looking for?
2014 Porsche Cayenne Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...