Question about Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Range Rover 1990 abs pump
Ok, your light WILL go out, and go back to normal once repaired, so don't fret.
Unless the pump was really loud (bad internals), you likely burned up the pressure switch (green thing on end of pump), which can be purchased in LA, USA; or through me, GreenDog Oregon (store name on Ebay US). These go out due to the pump running for an extended peroid of time, overheating the entire assembly, and allowing moisture into the pressure switch (Yes, they do go bad, and I have pictures of the inside of a bad one, full of brown muck). The reason this happens is bacause the nitrogen charge in the ABS accumulator (ball like canister attached to pump) has a limited life-span, and goes bad after about 7 years (Rave 2003). This means that the pump must run more often to accomidate braking, as it has no assist.
So, you can replace the Accumulator, and the pressure switch, and will likely be back in commission, after a proper bleeding, of course (directions for proper bleeding in Rave 2003 -CD available on ebay for appx $5)
Or, you could just replace the entire assy with a nkown good used part, and since the switch on the used part will likely be good, you can then just replace the ABS accumulator. The pressure switch is very hard to find, but I do have a couple of sources, here on the West Coast.
If you need further assistance or need a pressure switch (or parts), contact me through my ebay store, GreenDog Oregon. If you have trouble finding my store, just look for P38 and Classic parts, I'll be near the top of the store listings, as my prices are low, due to the low cost of rovers in the NW.
Posted on Oct 04, 2008
the fact that there are many things that can go wrong and it's tough to test some componetarnts without special equipment. This is just recommendations did you check if you have spark first You have to troubleshoot first check your electronic system Disrupter cup wiring everything
This is just recommendations did you check if you have spark first
You have to troubleshoot first check your electronic system
Disrupter cup wiring everything
Posted on Sep 26, 2010
Tips for a great answer:
Oct 30, 2015 | Land Rover Cars & Trucks
Jun 20, 2014 | 2000 Land Rover Range Rover
Dec 16, 2013 | 2000 Land Rover Range Rover
Dec 30, 2010 | 2000 Land Rover Range Rover
Dec 13, 2010 | 2000 Land Rover Range Rover
Sep 08, 2009 | 2000 Land Rover Range Rover
Apr 07, 2009 | 2000 Land Rover Range Rover
10 people viewed this question
Usually answered in minutes!