Question about 2005 Chrysler Pacifica Touring

1 Answer

What fuse do I need to change to make my temp light come on; on the dash board any make temp blow

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 579 Answers

Is this the only light that is out? If so the bulb has failed. You would have to change the bulb. Pop the plastic cover over your instrument cluster, Unscrew the instrument cluster (4 screws) , pull towards yourself .The bulb is behind the temperature gauge. There you will find a holder of the bulb, turn left or right to unscrew remove and change the bulb. I believe it to be 194. When installing bulb wipe clean with cloth and don't touch. Skin oil tends to make for short life. Install bulb and go in reverse till all is together. GOOD LUCK FRIEND.

Posted on Nov 12, 2014

  • renee
    renee Nov 12, 2014

    thank you very much... very helpful

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dash lights or none on H&A controls. changed fuses and relay. dim switch has two hot wires and one cold. would blow fuse under hood until Old switch circuit board shorted out


It sounds like you have. at least one if not more broken wires and it is going to be the pos, wire cause its grounding out causing the fuse to blow

Mar 14, 2016 | Cars & Trucks

1 Answer

Fuse for dash board lights and tail lites keeps blowing


You may have a damaged wire leading to one of the lights that keeps blowing.
Not fun, but you have to chase down the wiring to everything that keeps blowing out.

Mar 19, 2014 | Ford Focus Cars & Trucks

1 Answer

My dash light fuse keeps blowing on my 1998 toyota lite ace noah


This is most likely a short. You can test it by using an ohm meter in your fuse box by testing the terminals for where the fuse goes. If it is a short, you will then have to trace the wires in the dash to find out where the bare or broken wire may be.

Oct 02, 2012 | Toyota LiteAce Cars & Trucks

1 Answer

The dash lights in my 2001 Eclipse stopped working after I changed the bulbs, and fuses. Help?


My guess would be a short in the harness or the printed circuit board.

Jul 06, 2012 | 2001 Mitsubishi Eclipse

1 Answer

Peugeot boxer van 2007 changed interior light bulb blew fuse, renewed fuse, lights worked, but emissions lights on dash board came on and won't go out. Help


Try reading the OBDII with a code reader and see what it is then erase codes and see if it stays off ,could be more than one circuit on this fuse so the fuse blowing has thrown the light on for whatever reason ,Also try disconnecting the battery just out of interest for a few minutes and reconnect it might go out if your lucky

Feb 27, 2012 | Cars & Trucks

1 Answer

Dash board lights


Check the fuses. Under the steering wheel. If the fuse for the dash lights is blown, replace it. If it blows again, replace it again and look into what could cause the short.

The lights may also need to be changed in the dash.

The switch to turn on dash lights might be bad. If this is so, outside running lights won't work either.

Sep 07, 2011 | 1995 Eagle Talon

1 Answer

The dash board lights are not working and the


hi mate if you keep blowing fuses disconnect your front fog lights and try again if your dash lights work then a bulb has failed and gone to earth if it still blows the fuse disconnect the dahs pod (clocks) and reconect the fog lights if it does not blow the fuse the it probably is the dash pod or something associated with the pod hope it helps

Apr 02, 2009 | 1994 Subaru Impreza

2 Answers

Heater blows cold air ac blows warm air


Your problem is the air temp control blend door actuator is defective and not controlling temp u set. to change/access this part the dash assembly must be removed from the car.

Mar 24, 2009 | 1998 Ford Taurus

1 Answer

1999 Malibu dash lights go out


try to put a stronger fuse like 30amp or 20amp



good luck

Nov 02, 2008 | 1999 Infiniti.5 QX4

Not finding what you are looking for?
2005 Chrysler Pacifica Touring Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...