Question about Ford Fiesta
I want to start the engine after I have just replace a blown head gasket on a ford fiesta since there are no marks on the crank pulley if u can help with diagrams
Your shop manual should tell you this. You should have one if you replaced a head gasket to give you all the torque spec's and such.
Posted on Nov 25, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you get a haynes repair manual and follow it step by step everything should go fine. or clintons. if you have questions about what its telling you to do then that would be a good thing to ask. the problem is there are alot of different designs for engines and it could be affected and it could not be. but if your not sure you definitly need a repair manual. it would tell you everything but it will guide you in the right direction
Posted on Mar 20, 2009
White smoke out of the exhaust is one indication that the head gasket is blown. Another is to start the car and check the oil on the dipstick. If it's frothy or looks like a milkshake, this is another indication of a blown head gasket. The milky appearance indicates that coolant is in your engine, caused by a bad head gasket. If none of these symptoms occur, then the problem lies elsewhere. Hope this answers your question and feel free to post back with any other concerns or questions. Thank you.
Posted on May 23, 2009
Posted on Nov 16, 2009
Testimonial: "Thank you."
there isnt marks!the cam pulleys have do nothing with timing!remove the valve cover and see in the other end of the camshafts and find two eccentric cuts!turn the crankshaft to the top dead point on the cylinder 1 the two cuts must be in the same line on the upper or lower side.you need aspecial tool to lock the camshafts and another to lock the crankshaft!this is the timing procedure!now you can change anything you want!note!the cam pulleys are conejointed to the camshafts!no marks no pins no safe pins etc.isnt difficult but complicated simple!
Posted on May 28, 2010
Testimonial: "thank you"
Tips for a great answer:
Apr 08, 2015 | 1998 Ford Expedition
Jan 12, 2013 | 2001 Ford Focus
Nov 27, 2012 | 2006 Ford Focus
Mar 22, 2011 | Ford Fiesta Cars & Trucks
Nov 29, 2010 | Ford Fiesta Cars & Trucks
Oct 19, 2009 | 1996 Ford Contour
Oct 17, 2009 | 1988 Ford Escort EXP
Aug 31, 2009 | 2005 Ford Focus
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: