Question about Cars & Trucks

1 Answer

I have a 1995 gsxr 750 and it seems to not wanna get power to the starter just happened today if you turn the key on with the start enguaged you can hear the starter want to turn but immediately cuts off and if you try to start it normally nothing any ideas what to look at?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Replace the starter. Or the starter bendix,if you can find one.

Posted on Nov 11, 2014

  • Jonathan baran Nov 11, 2014

    Thanks for the responds, but it has to do with a wire I assume because it started randomly and now it has no power when you turn the ignition on the starter starts to turn but immediately cuts off due to a safety switch? Pinched wire? Crossed wires?

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
mrgreenz
  • 962 Answers

SOURCE: try to start car and nothing happens. replaced

Do the dash lights come on ? They should come on when the key is turned to the on position. If nothing happens check the engine relay. It is not too expensive to replace if you really want to eliminate that as the problem. Check all wires going to the starter and make sure it is wired correctly.

Posted on Feb 28, 2009

  • 6982 Answers

SOURCE: 1992 BMW 320I starting issues

It is possible that you have the two small wires reversed or one is touching battery lead connection.

Posted on May 09, 2009

  • 171 Answers

SOURCE: 1996 mitsubishi eclipse doesn't start when turning

check for voltage at the small start wire on the starter when cranking the engine--you will need someone help. If there is no voltage you may have a bad neutral safety switch ,which is on the trany shifter.you have an automatic trans i assume.
If so try putting in neutral when cranking.

Posted on Oct 08, 2009

CMR_Racing
  • 24 Answers

SOURCE: turn key nothing happens no clicking noises

Starter, altinator

Posted on Dec 13, 2009

  • 369 Answers

SOURCE: 2001 ford Taurus. Will not start. Turn key and

The problem would be the starter they go without any warning

Posted on Jan 10, 2010

Testimonial: "Terian5- Thanks for the help Traced the wire to starter. the wire looks like it snaps on. put it back and it started. I need to tighten nut."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2012 Mazda 5 won't start - starer and battery seem OK, the starter cycles, lights etc. work. Gas tank is full, car worked fine yesterday.


When you turn the key to start, what happens ? Does the engine turn over and not start ? Or does it not do anything ?

When you say that the starter seems ok, have you tested it ? Did you jump starter/solenoid and see if the engine turns over ? Are you getting power to the starter when turning the key to the start position ?

Nov 26, 2016 | 2012 Mazda MX-5 Miata

1 Answer

Turn key to crank position and only once in a while.has new battery and starter ,wires on starter are good.


When the vehicle doesn't start, you will need to check the purple wire at the starter solenoid for power when the key is held in the crank position. If there is power during this procedure, the starter will be defective. If no power, possible ignition switch... neutral safety switch..starter relay ( if equipped ) or wiring problem

Mar 07, 2016 | 1995 Oldsmobile Eighty Eight

1 Answer

Replaced battery cables on my 1998 Ford Expedition. Now when I turn the ignition the starter enguages then emediatly disenguages, like there is a load on it other than turning over the motor. Was star


You said you replaced the battery cables, how come? Problems getting car started? might be a bad starter, not cables... if battery is good, cables are new, may be starter solenoid malfunction... the solenoid tells the starter gear to engage the flywheel, then release the flywheel once the engine rotates fast enough (assuming you let go of the key once engine gets going :)... or you could even have a worn ignition switch or faulty wire behind the switch (not so likely)

Sep 04, 2012 | Cars & Trucks

1 Answer

Turned car off and now wont start seems to have power but does not even click


the starter soleniod isnt even enguaging?? turn the headlights on and see if they are bright. check the wires for any corrosion or burnt spots

Mar 10, 2011 | 1991 Buick Century

1 Answer

2003 Impala very occasionally will not start. Checked battery, starter relays, fuses. Have all kinds of power but no crank. It has done it twice, once Monday and again on Friday. First time a coworker...


Hello and Welcome to FixYa.com



Replace the starter solenoid is going out. The next time this happens tap on solenoid as one starts car -did it start right up? yes -- change starter





Thank you for using FixYa.com

Regards, Lee Davidian

Your FixYa Expert

Jan 18, 2011 | 2003 Chevrolet Impala

2 Answers

Engine doesn't even turn over but I have power


Check the fuse box for the ignition fuse. If it is not blown you need to get a volt meter and see if power is getting to the starter when the key is turned (watch for moving parts). If power at the starter then the starter is bad. No power at the starter then its the ignition itself, or a starter solenoid.

Aug 25, 2010 | 2000 Honda Accord

1 Answer

I have an 04 jetta, new battery and negitive terminal, wont start


check the starter if you power it on and there is no click there is a possibility tat there is a problem with the motor of the starter.

Jun 09, 2009 | 1995 Volkswagen Jetta

1 Answer

Im have a 40 watt fuse that blows when i start my truck occasiona


It could be either the ignition switch,clutch safety switch(if applicacle)or the starter solenoid,I'm including the circuit diagram for you,one of the 2 or three if it's manual trans has short,if the fuse is blowing as soon as you turn the key on(not engaging the starter)it will be in the switch itself or the clutch safety switch.If it happens when you go to engage the starter it's most likely the solenoid.
e261d1f.gif

May 12, 2009 | 1995 GMC Sierra C1500

2 Answers

1999 Kia Sportage: Issue with car starting


battery is low on voltage as far as the locks clicking, you could also have a starter issue, try charging the battery first

Mar 02, 2009 | 1999 Kia Sportage

2 Answers

Truck wont turn over


Check for power to and from ignition switch,there is also a fused link that can protect the wiring, or keep it from working.Jump starting can make this happen if the proper connections are not made.look at the starter is wiring ok?Make sure you move the shifter out of park and then back,to be sure it is all the way in park,as any miss alignment will not let starter engage.Good luck!

Jan 26, 2009 | 2003 GMC Sierra 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...