Question about 1993 Nissan Pickup

1 Answer

How do you change rear brakes - 1993 Nissan Pickup

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You will have to find bolts that fit the drum.on the drum over the brakes has 3 places on it that has places where you have to screw the bolts into to remove the drum. Once you have the bolts in the drum turn bolts in a little bit at a time going until bolts eventually push drum off of brake shoes.the bolts you need should be metric bolts. I believe the bolts are 13 to possible 14 or 15 mili meter
Go to the hardware store and get 3 sets of 13,14,15 mm bolts 3 of the bolts should fit.once you have the brake drum off start on one brake shoe at a time. Lay your parts out on the ground one thing at a time better yet take a picture first and remove parts one thing at a time on ground so you know where and how they go back on. Make sure you have two cans of brake clean to spray brake drum down and spray where all the parts hook up to plate where brake shoes hook to until somewhat are clean.then make sure that you match up the brake shoe lining with the proper brake shoe, one brake shoe lining will be longer than the other. Should say primary or secondary. Just match them up with same length lining lenghth.if this doesn't help go to utube and pull up your year of truck make and model. Hope this helps.

Posted on Nov 10, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

Right rear brakes keeps messing up on a 1998 Chrysler Cirrus, we keep buying new right rear brakes about every two months or less. Can you help us out?


You have to make sure the brake system is operating properly.Change both rear brakes it sounds like the left rear brake side is not working making the right side wear out so quick.After changing the back brakes bleed them making sure you have no air in your brake lines.start bleeding them from the left rear to the right rear to the left front to right front to master cylinder.

Apr 02, 2014 | 1998 Chrysler Cirrus

1 Answer

1999 plymouth breeze. step on brakes and the front brakes have a bad pulsing to them. previous owner hab brakes done rotars turned and pads replaced. any suggestions on how to address this problem


Symptom: Brake Pedal Pulsates Change When: Braking Change Where: Passenger Compartment Change -->lg-bl.jpg lg-br.jpg
Priority Action Part Type Cause 1 Inspect Brake Drum Specs Brake Drum Out of Adjustment, Out of Round, or Cracked. 2 Inspect Brake Drum Unevenly Worn or Out of Round Brake Drum(s). 3 Inspect Brake Rotor Incorrectly Machined Brake Rotor. 4 Inspect Wheel Bearing-Front Incorrectly Tightened or Installed Wheel Bearing. 5 Inspect Wheel Bearing-Rear Incorrectly Tightened or Installed Wheel Bearing. 6 Inspect Wheel Nut Loose, Worn, or Damaged Wheel Nut(s). 7 Inspect Rear Axle Bent Rear Axle.

Apr 13, 2013 | Plymouth Breeze Cars & Trucks

1 Answer

I have a F150 p/u 2000 for 10yrs. Each year I change the brake pads. But the rear pads still looks like new. The front pads are worn down. What can be causing the problem?


normally, you replace the rear brake pads every other change in the front brake pads. for your case, it seems that the front brakes are the only ones working.

bleed your brakes to check if rear brakes are still working. after bleeding, check your brake master if it puts pressure equally to the 4 brakes.

Aug 05, 2011 | Ford F-150 Cars & Trucks

2 Answers

Does the 2003 gmc yukon have rear rotors? and do the brakes need to be changed if the rotors need to be machined?


Yes, it has rear Disc Brakes, I would suggest to change the rear pads since they have to remove the rear Brake Calipers to remove the rotors and it wouldn't take much more time or labor to replace the pads at that point. That way when your rear rotors are re-installed and your new brake pads are installed your rear brakes should give you longer service life and better stopping power.

Jun 04, 2010 | 2003 GMC Yukon

1 Answer

My toyota 2001 rav 4 makes rubbing sound only when i step on the brakes, thought it was the front brake early indicator, so changed front brakes..they needed it! But still makes the noise..sounds like it's...


Yes, this will be the rear brakes. Most of these are the same design as the front and are as easy to replace. You should always change all the front and back brakes at the same time, as it will affect braking and handling.

Change rear brakes and your problem will be resolved.

Chip

May 31, 2010 | 2001 Toyota RAV4

1 Answer

How do I change the Q7 rear brake light bulb?


how do i change rear brake light in audi q7

Feb 13, 2010 | 2007 Audi Q7 4.2 FSI

1 Answer

Changed rear brake shoes, Right rear locks up


Check adjustment, and put a new spring kit in. The old ones might be weak and used.

Nov 04, 2009 | 1996 Dodge Ram

1 Answer

Rear axle bearings


There are 4 bolts for each rear axle. They are located behind the rear brake drums. Remove e-brake cable from rear drum and take off brake line.(carefully). I recomend draining and changing your rear differential fluid too, because if the fluid by run out of axle housing. also you should replace the seals for the axles of if you are changing the bearings. When you are done don't forget to bleed your brakes, and hooking up e-brake cable. I hope this answers your question.

Jan 28, 2009 | 1986 Toyota Pickup 4WD

Not finding what you are looking for?
1993 Nissan Pickup Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...