Question about 2006 Nissan Armada

1 Answer

2006 nissan armada- how to replace driver side hinge pin and bushing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 876 Answers

Call RockAuto (or go online to RockAuto.com)

2006 NISSAN ARMADA 5.6L V8 : Body : Door Hinge Pin & Bushing Kit $12.58

Posted on Nov 10, 2014

Testimonial: "Need installation instructions"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
short shadey
  • 421 Answers

SOURCE: 2001 Blazer door hinge pins and bushing replacement

you need a special spring compressing tool to remove and reinstall the hinge spring and then its a matter of removing the door installing the new bushing and rehang the door with new pins ive tried doing this while leaving the door on the car trust me its just harder that way good luck and please rate -jeff

Posted on Sep 01, 2008

jschoon77
  • 55 Answers

SOURCE: How do you remove the brake light assembly on a 2006 Nissan Armada

These can be a "bugger"... Once you have the 2 screws out, I usually get a small screwdriver wrapped in a rag between the lamp and the quarter panel (on the side of the vehicle) and gently pry the lamp straight towards the back. You might think that something is going to break and just when you think it will for sure, it will pop loose and the lamp will be in your hands, so be ready to catch it.

Good luck!

Nissan Scope Certified Technician- 10 + years in Nissan dealership

Posted on Nov 03, 2008

chispitas
  • 69 Answers

SOURCE: I need to replace the door hinge pin and bushing

yes you have to remove the door ... the pin have a C washer lock at the bottom. electircal wires are to be unpluged from inside the door or at the driver kick panel

Posted on Jul 26, 2009

  • 3 Answers

SOURCE: how to replace door hinge pin and bushings without a spring compr

Harbor Freight has the tool for $3.99. I just bought one last Friday and replaced my hinge pins this weekend on my 2000 Chevy Blazer. You have to get that tool. Online they are $15.00. Make sure you support the door before you take out the old pins. I just lowered the window, took rope and tied it to the garage rafters and was all set. have fun!

Posted on Sep 08, 2009

johnjohn2
  • 5763 Answers

SOURCE: replacing windshield wiper bushing nissan altima 99

This bushing is a pain to install, i have done many of these and end up messing them up before i get one on, to tell you the truth it does not last.I have tried to save customers money by installing the bushing and it comes back to bite me, they get mad because the wiper linkage fell off again in the rain, the sad part was that they were advised that the fix may not hold but they agreed to it to save money, i then found out that the linkage arm could be replaced , it only costs 12.00.
there are many auto part stores that sell it even the dealer, Dorman is one company, you can google it.
The way i get these bushings on it by applying a little grease around bushing and then with two sockets and a vise, i then press bushing into arm. good day hope this is helpful.

Posted on May 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side door does not close. Latch broken and door sits down below catch on body of car.


may need new hinges on door and body of vehicle, if so it is about 600 -700 to replace , may be able to get new bushing and pins , without replacing hinges

Sep 09, 2010 | 1998 GMC Jimmy

4 Answers

Driver side door loose


WEll, usually not a bushing, but there is often lots of wear at the pivot pin. Usually best to replace entire hinge, as teh tolerance goes off when the pin wears...

Aug 01, 2010 | 1991 Nissan Sentra 2 Door

2 Answers

My drivers side door drops every time I open my door. Is it because of the door hinge or do I need to replace the door pins?


the hinge pins rides on brass bushings. if the door does not latch replace the pin and bushings with oversized ones available at Chevrolet parts department
you will need a sring compressor which is available at Auto Zone

Feb 20, 2010 | 1990 Chevrolet S-10 Blazer

1 Answer

Driver side door problems


Get a set of hinge pins and bushings. There is a tool that you can get at harbor freight or tool king for removing the bushings. I use a floor jack and a 4x4 block of wood to support the door. you will need a spring compressor to remove the door "hold" spring. Once you have that removed, you can use a brass drift or similar rod to tap the pins out. once they are out the door will be resting on the wood. I use heater hose to wedge between the fender and the door to prevent dents and scratches. tap out the bushings. ever so gently tap in the replacements. apply a generous helping of white grease to the bushing and pin. line up the door and insert the pins. you may have to apply an ever so light amount of tapping pressure on the pins to set them final. reinstall the door spring and lube the joints with white grease. be proud of yourself as your just saved a **** load of money.

May 21, 2009 | 2000 Chevrolet Blazer

1 Answer

Door sag


Hello, you need to replace the hinge pins and bushings. Just take a hammer and knock the hinge pins out and put the new pins with bushings in the hole and tap it into place. Some vehicles have a locking ring on the bottom of the hinge pin just knock it off with your hammer and a screwdriver. They don't have to be replaced but, if you want the dealer sells those too. Good luck and any questions please ask.

Jan 23, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
2006 Nissan Armada Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...