Question about Cars & Trucks

1 Answer

I have a 2002 ford f150 5.4L 4 door my 4x4 wont work but I can hear my transfer case ingage but it dosent catch can it be my front UJ's?

I have a 2002 ford f150 5.4L 4 door my 4x4 wont work but I can hear my transfer case ingage but it dosent catch can it be my front UJ's going bad? Need help thanks.

Posted by on

Ad

1 Answer

If it was front U-joints, you would have gotten under there
& checked them, before you came here,not ask us for a
guess

I would say check scan tool data for the transfer case,
then work on that issue

May have a failed encoder motor

See what You Tube Video has

Posted on Nov 10, 2014

  • 1 more comment 
  • jaysuggashie Nov 10, 2014

    I tried scanning it no code pops up no check engine light comes on, Im not that good with vehicles so I was just asking and get a positive feed back.

  • Anonymous Nov 10, 2014

    Then your off to a repair shop

  • jaysuggashie Nov 10, 2014

    Id drive up to 4hrs to get to a shop and plus the lake is starting to freeze and wont be able to drive on ice till Dec or Jan

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 02 foard explorer shift motor was bad i think and i removed it, i started it to relocate it, installed the new shift motor


Don's 1999 Ford Ranger shift motor PROBLEM SOLVED ...

? 13:05
https://www.youtube.com/watch?v=wcn39gwPWfI
Oct 1, 2013 - Uploaded by gtarman49
Don's 1999 Ford Ranger shift motor PROBLEM SOLVED. ...How to find replace fix 4x4 transfer case shift module 2002 Ford Explorer 4 wheel ...

How To Install Replace 4x4 Transfer Case Shift Motor Ford ...

? 9:15
https://www.youtube.com/watch?v=9ldrtZODxQ8
Oct 26, 2010 - Uploaded by 1A Auto Parts
How To Install Replace 4x4 Transfer Case Shift Motor Ford Explorer .... transfer case shift module 2002 Ford Explorer 4 wheel drive not working ...

How to find replace fix 4x4 transfer case shift module 2002 ...

? 3:07
https://www.youtube.com/watch?v=sZw3SS2Pt-4
Nov 3, 2013 - Uploaded by kirk colombo
... transfer case shift module 2002 Ford Explorer 4 wheel drivenot working ..... I replaced the transfer motor so i think it is the control module.


Jan 08, 2016 | Cars & Trucks

1 Answer

No lights for transfer case on 1985 gmc jimmy, 4x4 not operating no indicator light to show position,


if you have no lights that's one thing , but if 4x4 wont ingage that tells me it may be a fuse and if the 4x4 wont ingage it wont light the icon on dash

Feb 26, 2015 | GMC Cars & Trucks

1 Answer

Auto 4 wheel drive will not engage. Just a clicking sound in right front panel


it sounds like u are getting power [the clicking is the relay]ur next step would be to go under the truck and find the moter on the transfer case .have someone engage the 4x4 and listen for the moter working.if not uplug the harness and see if u have power there when ingage or disen gage the 4x4 .if u do then it is most likely the moter or the spline on the moter witch then u have to remove,to check

Jan 22, 2011 | 1994 Ford Bronco

1 Answer

4x4 not working not ingage


This could be the transfer case selector motor or the switch but testing will be needed, you would need to test for power at the actuator motor to see if its getting power and if you hear it moving.the other thing is the hubs, ford had vaccum operated hub or automatic they call them and the hubs freeze up and dont move to lock the front wheels.

Jan 12, 2011 | 2006 Ford F-150

1 Answer

My 2001 silverado w/69,000 miles has no light indicating 2 or 4 h


THE TRANSFER CASE MOTOR IS NOT WORKING TO INGAGE 4 WHEEL DRIVE. CHECK WITH DOOR OPEN WHEN YOU PUSH 4 WHEEL SWITCH YOU SHOULD HEAR MOTOR INGAGE 4 WHEEL DRIVE. IF YOU HEAR MOTOR BUT STILL NO 4 WHEEL DRIVE THE GEAR ON MOTOR COULD BE DAMAGED. REPLACE TRANSFER CASE MOTOR.

Jan 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

The 4wd wont disingauge back to 2wd i jacked up driverside front tire while motor was running pushed 2wd button turned wheel till it catches wont come out


Check the fuse to the 4x4, if the fuse is good then check the 4x4 electric motor actuator on the transfer case. You should hear it work from 2wd, 4hi to 4low and back to 2wd with the push of the switch. if you don't hear it working then check the wire harness at the actuator motor, look for any damages like corrosion or cracked wire connector clips. If the 4x4 actuator is working on the transfer case. There is a vacuum switch on the top of the transfer case, driver side but when that fails, your front hub stay's locked in the on position. Good luck and keep me posted and hope it's a simple fuse that has gone bad. You can pick up all these parts at Auto Zone or Parts Source and they will have the step by step instructions for you to get the job done with common tools. Replacing the vacuum switch on top of the transfer case take about 15 min to replace if you don't have to jack up the Jimmy if not 30 min if you have to jack it up. Be safe and keep me posted, be glad to know your go it working again.

Jan 06, 2010 | 1999 GMC Jimmy

1 Answer

Won,t shift transfer case into 4wheel drive


Is the truck on the fly 4X4 push button or is there a lever on the floor you pull into 4 wheel drive? Located on the back of the transfer case not hard to change few bolts and a wire harness. Does the front drive shaft turn when you put it in 4x4 and the front wheels won't ingage? If so then its not your transfer case its the actulator on the front axle at the gear hub or pumpkin it will have two 10mm bolts and a black plastic cover if so remove cover and spray actulator shaft with wd-40.

May 19, 2009 | 2008 Ford F-350

1 Answer

AUTO 4X4 FORD BRONCO NOT SURE IF 4X4 IS INGAGING


I'll bet you've also got auto locking hubs. If you do, replace them. If you don't, you might have a bad transfer case.

Dec 21, 2008 | 1988 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...